In article <8c98e32753.old_coaster@old_coaster.yahoo.co.uk>, Tony Moore <[email protected]> wrote: > On 5 Mar 2013, Dave Symes <[email protected]> wrote: > > In article <[email protected]>, > > Dave Symes <[email protected]> wrote: > > > > > Ah indeedy, that seems to be the place and I now have networking on > > > the Emu 6.20 > > > > Still one remaining problem though. The Bridge on the PC W7 Pro > > remains okay, but after a reboot the RPCEmu has lost it's config to > > the bridge and I have to re-set it every time. (RPCEmu toolbar menu > > Networking). > > > > Is there a bug here, or is there some way to make it persist after a > > boot?
> Try setting the values in Program Files\RPCEmu\rpc.cfg to > bridgename = rpcemu > mouse_twobutton = 0 > network_type = ethernetbridging > mouse_following = 1 > cdrom_type = 0 > cdrom_enabled = 0 > refresh_rate = 60 > stretch_mode = 1 > sound_enabled = 1 > vram_size = 2 > cpu_type = SA110 > mem_size = 128 > cpu_idle = 1 > I suspect that you may have mem_size > 128, which can cause problems. > Tony Thanks for the above note Tony. New day, Wednesday, upon cold boot of the whole system, everything now seems to be working/networking okay. Most of the values here are the same, and as I'm aware of the > 128 problems... (Also on VRPC) that's what it's always been set at. One question though. cpu-idle = 1 on your setup, on mine it's = 0 (obviously yours is On mine is Off) but in real terms what does it mean? Thanks Dave -- Dave Triffid _______________________________________________ Rpcemu mailing list [email protected] http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
