As a suggestion, we should setup the tests against the testing branch to run
with a couple different configs. (I'm assuming that it currently tests a
"kitchen sink" config, i.e. everything enabled)
I would suggest that we do
1. "kitchen sink" config, everything enabled
2. "minimum" config, minimum syslog replacement, tcp/udp/files, everything else
disabled
#2 it to catch cases like the ptcp test that are enabled when they shouldn't be
and then if the distro maintainers can pass along their configs, we should add
them as well.
David Lang
On Fri, 5 Dec 2014, Rainer Gerhards
wrote:
2014-12-05 16:13 GMT+01:00 singh.janmejay <[email protected]>:
Im the culprit.
Me as well. I should have seen that when I merged. I'll hunt for the commit
in question.
Rainer
The patches for tests for rscript functions replace and
wrap went in 2 sets. One which had EXTRA_DIST entries missing. I think
second set is a part of an open PR. Which is why its not part of 8.6.0.
Sorry for the confusion.
mmjsonparse it seems is trying to load ptcp, did you enable ptcp in
configure?
On Fri, Dec 5, 2014 at 8:04 PM, Thomas D. <[email protected]> wrote:
> Hi,
>
> On 2014-12-05 13:01, Rainer Gerhards wrote:
> > Thanks. It looks like it cannot find the conf file for some (yet
unkonwn)
> > reason.
>
> Rainer, the rsyslog-8.6.0 release tarball [1] doesn't contain a file
> like "rscript_replace.conf", "gethostname.conf"...
>
> I tried to build from git master and the test suite passed, well 2
failed:
>
> =========================================
> rsyslog 8.6.0: tests/test-suite.log
> =========================================
>
> # TOTAL: 104
> # PASS: 97
> # SKIP: 5
> # XFAIL: 0
> # FAIL: 2
> # XPASS: 0
> # ERROR: 0
>
> .. contents:: :depth: 2
>
> SKIP: sndrcv_udp.sh
> ===================
>
>
>
===============================================================================
> [sndrcv_udp.sh]: testing sending and receiving via udp
>
> SKIP: imuxsock_logger_root.sh
> =============================
>
> [imuxsock_logger_root.sh]: test trailing LF handling in imuxsock
> This test must be run as root with no other active syslogd
>
> SKIP: imuxsock_traillf_root.sh
> ==============================
>
> [imuxsock_traillf_root.sh]: test trailing LF handling in imuxsock
> This test must be run as root with no other active syslogd
>
> SKIP: imuxsock_ccmiddle_root.sh
> ===============================
>
> [imuxsock_ccmiddle_root.sh]: test trailing LF handling in imuxsock
> This test must be run as root with no other active syslogd
>
> FAIL: mmjsonparse_simple.sh
> ===========================
>
>
>
===============================================================================
> [mmjsonparse_simple.sh]: basic test for mmjsonparse module with defaults
> rsyslogd: could not load module '../plugins/imptcp/.libs/imptcp.so',
> dlopen: ../plugins/imptcp/.libs/imptcp.so: cannot open shared object
> file: No such file or directory [try http://www.rsyslog.com/e/2066 ]
> rsyslogd: input module name 'imptcp' is unknown [try
> http://www.rsyslog.com/e/2209 ]
> rsyslogd: error during parsing file
> ./testsuites/mmjsonparse_simple.conf, on or before line 6: parameter
> 'port' not known -- typo in config file? [try
> http://www.rsyslog.com/e/2207 ]
> rsyslogd started with pid 50217
> connect(): Connection refused
> connect() failed
> error in trying to open connection i=0
> error opening connections
> error during tcpflood! see rsyslog.out.log.save for what was written
> cp: cannot stat ‘rsyslog.out.log’: No such file or directory
>
> FAIL: mmjsonparse_cim.sh
> ========================
>
>
>
===============================================================================
> [mmjsonparse_cim.sh]: basic test for mmjsonparse module with cim cookie
> rsyslog.pid exists, trying to shut down rsyslogd process 50217.
> rsyslogd: could not load module '../plugins/imptcp/.libs/imptcp.so',
> dlopen: ../plugins/imptcp/.libs/imptcp.so: cannot open shared object
> file: No such file or directory [try http://www.rsyslog.com/e/2066 ]
> rsyslogd: input module name 'imptcp' is unknown [try
> http://www.rsyslog.com/e/2209 ]
> rsyslogd: error during parsing file ./testsuites/mmjsonparse_cim.conf,
> on or before line 6: parameter 'port' not known -- typo in config file?
> [try http://www.rsyslog.com/e/2207 ]
> rsyslogd started with pid 50251
> connect(): Connection refused
> connect() failed
> error in trying to open connection i=0
> error opening connections
> error during tcpflood! see rsyslog.out.log.save for what was written
> cp: cannot stat ‘rsyslog.out.log’: No such file or directory
>
> SKIP: omod-if-array.sh
> ======================
>
> [omod-if-array.sh]: test omod-if-array via udp
> NOTE: the interface checked with this test is currently NOT
> supported. We may support it again in the future. So for now,
> we just skip this test and do not remove it.
>
>
>
> => However, the release tarball is invalid :(
>
>
> -Thomas
>
> _______________________________________________
> rsyslog mailing list
> http://lists.adiscon.net/mailman/listinfo/rsyslog
> http://www.rsyslog.com/professional-services/
> What's up with rsyslog? Follow https://twitter.com/rgerhards
> NOTE WELL: This is a PUBLIC mailing list, posts are ARCHIVED by a myriad
> of sites beyond our control. PLEASE UNSUBSCRIBE and DO NOT POST if you
> DON'T LIKE THAT.
>
--
Regards,
Janmejay
http://codehunk.wordpress.com
_______________________________________________
rsyslog mailing list
http://lists.adiscon.net/mailman/listinfo/rsyslog
http://www.rsyslog.com/professional-services/
What's up with rsyslog? Follow https://twitter.com/rgerhards
NOTE WELL: This is a PUBLIC mailing list, posts are ARCHIVED by a myriad
of sites beyond our control. PLEASE UNSUBSCRIBE and DO NOT POST if you
DON'T LIKE THAT.
_______________________________________________
rsyslog mailing list
http://lists.adiscon.net/mailman/listinfo/rsyslog
http://www.rsyslog.com/professional-services/
What's up with rsyslog? Follow https://twitter.com/rgerhards
NOTE WELL: This is a PUBLIC mailing list, posts are ARCHIVED by a myriad of
sites beyond our control. PLEASE UNSUBSCRIBE and DO NOT POST if you DON'T LIKE
THAT.
_______________________________________________
rsyslog mailing list
http://lists.adiscon.net/mailman/listinfo/rsyslog
http://www.rsyslog.com/professional-services/
What's up with rsyslog? Follow https://twitter.com/rgerhards
NOTE WELL: This is a PUBLIC mailing list, posts are ARCHIVED by a myriad of
sites beyond our control. PLEASE UNSUBSCRIBE and DO NOT POST if you DON'T LIKE
THAT.
