On Fri, Jan 3, 2014 at 8:09 AM, Sebastian Huber <sebastian.hu...@embedded-brains.de> wrote: > On 01/02/2014 09:23 PM, Marcos Díaz wrote: >> >> Hi, thanks for answering, first of all in the file lpc24xx.h there are >> two definitions for FIO_BASE_ADDR the second one (which is the one >> that I use) 0x20098000 is wrong, and when Itried to use the function >> lpc24xx_gpio_set for testing I noticed that it tried to write based on >> that value. the correct value 0x2009C000 works fine on my board, and >> looking into the lpc17xx manual I could see that it`s the correct >> value for the register. > > > In the UM10470 LPC178x/7x User manual Rev. 2.1 — 6 March 2013 we the value > 0x20098000 for the GPIO register base. At 0x2009C000 we have the EMC > registers. > > Can you please provide a link to your manual? > UM10360 LPC17xx User manual Rev. 2 — 19 August 2010
> >> In another part, in the configuration of modules, specifically in the >> function lpc24xx_module_do_enable in io.c there isn't an option for >> setting the clock for the module if ARM_MULTILIB_ARCH_V4 isnt defined >> (my case) so it does nothing in that case. So far this is what we >> realized and what could be causing us problems. Thanks. > > > The LPC17XX has a different clock module. But is it implemented? > > >> PS: So far I thought that the macro ARM_MULTILIB_ARCH_V4 was for >> separate things that are for the lpc17xx from things of the lpc24xx, >> but Iḿ not pretty sure if itś true, so, what is this macro for? > > > Yes, the ARM_MULTILIB_ARCH_V4 and ARM_MULTILIB_ARCH_V7M defines distinguish > between LPC24XX and LPC17XX. > Thanks again! > > -- > Sebastian Huber, embedded brains GmbH > > Address : Dornierstr. 4, D-82178 Puchheim, Germany > Phone : +49 89 189 47 41-16 > Fax : +49 89 189 47 41-09 > E-Mail : sebastian.hu...@embedded-brains.de > PGP : Public key available on request. > > Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. > -- ______________________________ Marcos Díaz Software Engineer San Lorenzo 47, 3rd Floor, Office 5 Córdoba, Argentina Phone: +54 351 4217888 / +54 351 4218211/ +54 351 7617452 Skype: markdiaz22 _______________________________________________ rtems-devel mailing list rtems-devel@rtems.org http://www.rtems.org/mailman/listinfo/rtems-devel
