Re: [Rtk-users] FDK for planar ct

[Robert Calließ]

Hello,

thank you for the fast reply.

To answer your questions first.

In this case the abbrevation pcb stands for printed circuit board.

Next point is the trajectory we are currently handling with.

Please see the attached image "trajectory.png". There are two schematics showing the side view and top view for trajectory type 1

and a side-view for trajectory type 2.

 

For type 1:

The xray source is fixed. The pcb is clamped within a transport, so the pcb and the detector are moveable with in the xy plane.

As you can see at the image, the pcb moves along a circular path but the pcb itself is not rotating. And let's assume that the iso ray

always passes through the centre of the pcb and the centre of the detector.

 

For type 2:

The xray source is fixed and the detector is tilted. The pcb lies centred in the middle of a table. So that the pcb rotates around its centre

around the z-axis.

 

 

I hope this makes clear what trajectory i'm dealing with. Thank you.

 

Kind regards,

Robert C.

 

 

 

 

 

 

Gesendet: Dienstag, 10. Oktober 2017 um 15:31 Uhr
Von: "Cyril Mory" <cyril.m...@creatis.insa-lyon.fr>
An: "Robert Calliess" <robert.calli...@gmx.de>, rtk-users@public.kitware.com
Betreff: Re: [Rtk-users] FDK for planar ct

Dear Robert,

Your description of the trajectory is very obscure to me. Maybe you have a very unusual X-ray system. Could you make the following points clear :

- what is a PCB ?

- what is fixed/moving in your system (we need this information for the object, the source and the detector), and what kind of trajectories have the moving parts ?

- can you re-draw your sketch with just 2 or 3 positions (ideally, on similar but separate drawings), each one with the object, the source and the detector ?

If you do that, we should have a clear understanding of how your acquisition goes, and be able to give you appropriate advice.

Best regards,

Cyril

 

On 10/10/2017 15:02, Robert Calliess wrote:

Hello rtk users,

I have question to the RTK FDK Filter. As far as I understand from to the fourier slice theorem the object to be reconstructed needs a circular trajectory and needs to rotate its own centre.

Please have a look at the attached sketch. With this planar trajectory (Object, a PCB, is moved on a circle trajectpry  “in-plane”, PCB itself is not rotating) do I need

a special filtering if I want to use FDK for planar CT with respect to the sketched trajectory ? I tried a circular in-plane trajectory where the PCB is centred and rotates

around its centre point. And with 100 projections I get good results. But with the trajectory I described (sketch, attached image) the results are not so good.

Because of the row-wise ramp filter It looks like there is a directional dependency. My assumption is, and with respect to fourier slice theorem, that the missing object

rotation (rotation around itself) causes there directional effects.

 

So my questions to the experts are. Do I need to apply a special filtering before backprojecting with FDK or is it just the wrong

algorithm for this kind of trajectory ?

 

kind regards,

Robert C.

 

 

 

_______________________________________________
Rtk-users mailing list
Rtk-users@public.kitware.com
http://public.kitware.com/mailman/listinfo/rtk-users

_______________________________________________
Rtk-users mailing list
Rtk-users@public.kitware.com
http://public.kitware.com/mailman/listinfo/rtk-users