Phil Wilshire and I are working on a PCI I/O card design project. See our recent
postings in the archives.
John
On Thu, 29 Apr 1999, you wrote:
>Has anybody worked with any PCI digital IO cards? I have found references on
>the newsgroup to National Instruments' PCI-MIO-16XE-10, however this card is
>prohibitively expensive (approximately $2000). It has built-in A/D which I do
>not need and it does not have enough digital lines (only 8). I have been
>working with the parallel port, however it is too slow for my application. To
>change the state of the parallel port on my (Dell XPS-R 400MHz) computer takes
>approximately 1.4us inside of an interrupt routine. Thanks in advance for your
>help.
--
John Storrs, Laboratory for Micro Enterprise
125 Culham 1 Site, Culham, Abingdon OX14 3DA, UK
tel/fax 01865 407085 email [EMAIL PROTECTED]
www http://www.i-way.co.uk/~storrs
--- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
----
For more information on Real-Time Linux see:
http://www.rtlinux.org/~rtlinux/
