The disk is fine , cause it works without problem on a non RTAI kernel
(2.0.36/2.1.x/2.2.x/2.3.x), but as soon as i insert the rtai mod i
get the problem , and it doesn't go away after removing the mod.
It is a Gigabyte MB, and as you say you had the same problem with a
GA board maybe thats it, but its still strange that it shows up only
with RTAI loaded.
MfG,
Erwin
Bernhard Kuhn wrote:
>
> Erwin Rol wrote:
>
> > Oct 3 18:44:57 rawpower kernel: scsi : aborting command due to timeout
> > : pid 36319, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 61 37 85 00
> > 00 02 00
> > Oct 3 18:45:27 rawpower kernel: scsi : aborting command due to timeout
> > : pid 36327, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 68 f7 bb 00
> > 00 02 00
> > Oct 3 18:45:57 rawpower kernel: scsi : aborting command due to timeout
> > : pid 36336, scsi0, channel 0, id 0, lun 0 Write (6) 00 00 57 02 00
> > Oct 3 18:46:27 rawpower kernel: scsi : aborting command due to timeout
> > : pid 36344, scsi0, channel 0, id 0, lun 0 Read (6) 01 40 6b 02 00
> > Oct 3 18:46:57 rawpower kernel: scsi : aborting command due to timeout
> > : pid 36353, scsi0, channel 0, id 0, lun 0 Write (10) 00 00 27 77 7f 00
> > 00 02 00
>
> I experienced that messages two times, when harddisks were going to die ...
> Also, i had this messages on a Gigabyte GA686DLX along with
> the build in Adaptec 2940UW and Kernel 2.2 (and IBM DCAS34330 (IRC)).
> (Here, the disks were ok since everything was just fine with an
> ASUS Dual-MB - i had to throw out the SCSI-disks and use EIDE).
>
> Neither RT-Linux nor RTAI were installed on the systems above ...
>
> Maybe it helps ...
>
> Bernhard
> --- [rtl] ---
> To unsubscribe:
> echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> ----
> For more information on Real-Time Linux see:
> http://www.rtlinux.org/~rtlinux/
--
Q - S O F T - E N G I N E E R I N G
Rodachtalweg 11, 81549 Muenchen, Germany
Erwin Rol (Software Engineer) phone: +49-89-68050051
[EMAIL PROTECTED] fax : +49-89-68050052
--- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
----
For more information on Real-Time Linux see:
http://www.rtlinux.org/~rtlinux/
