Hi Jens, i wrote a module generating the servo-timings with a United Instruments PD2-MF multi-io-card with a 1GHz Pent. I guess if you only use a small amount of threads it may work. In my case there are running a lot of concurrent threads and the timing-jitter caused the servo making a lot of noise, so i used a separate ATMEL-Controller for generating the servo-timings.
Thomas Jens Gassmann wrote: > Hi everybody > > > One of you has experience with the control of model construction servos > over that parallel port haven I has only old scripte with new rtlinux > 3.1 and kernel 2.2.19 not to be running. > > Thanks > > Jens Gassmann > > ANGEL Internet Services GmbH > LütticherStr. 14 > 50674 Köln > > Tel.: 0221/944031-0 > Fax.: 0221/944031-8 > Mail: [EMAIL PROTECTED] > WWW : http://www.angel.de/ > > > > -- [rtl] --- > To unsubscribe: > echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR > echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] > -- > For more information on Real-Time Linux see: > http://www.rtlinux.org/ > > > > -- [rtl] --- To unsubscribe: echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED] -- For more information on Real-Time Linux see: http://www.rtlinux.org/
