Qeltaras wrote:
I use 2 ethernet card on the same pc
and i start the first ethernet card (rt_8139too driver) with the command:
rtnet start
the sistem wait on the line: Wait for all slaves...
I start the second ethernet card (rt_tulip driver) with e new rtnet
command, i've modified the rtnet script for installing a single driver
in slave position and the sistem write:
Rtnet: registred rteth1
rteth1: ...........
RTDM: registred name device TDMA1
Stage1: searching for Master...
Stage2: waiting for other slave... hard_start_xmit returned -11
Stage3: waiting for common setup completion...ioctl: Invalid argument
And I don't now why...
can you help me?
thanks
Nicol@
We never tested such a setup of two NICs in the same PC and
cross-connected. I'm not sure what should happen, but there might be
some side-effects either due to principle problems with this scenario
(e.g. IP routing is designed to take the easy way: rt_loopback - should
be switched off!) or hidden bugs in RTnet. Specifically, I would like to
exclude the second case. Therefore, could you post your rtnet.conf files
and, if you modified the rtnet script for the second card, that file as
well?
Jan
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7412&alloc_id=16344&op=click
_______________________________________________
RTnet-users mailing list
RTnet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/rtnet-users
