Hi
I am a newbie to the RTnet community and am busy setting up RTnet on a PC.
I am running Fedora Core 2 with RTAi 3.0r4 and using RTnet 0.8.3
I have a 3Com 900 (Boomerang) card and have tried to use the rt_3c59x.o file, but when I run ./rtnet start it gives me a "no device error"
Can anyone help?
 
 
Thanks in advance
 
Seshan Govender
Engineer
Denel Aerospace Systems
+2712 671 1202
+2782 823 8043
[EMAIL PROTECTED]
 

*******************************************************************************************************

Disclaimer: The information contained in this communication is confidential and may be legally privileged.

It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it.

Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited.

If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer.

Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message.

Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt.

This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person.

*******************************************************************************************************

Reply via email to