Hi Jan

Firstly, thanks as the system between my two PCs is running 
after I configured them as master and slave. From the 
rtnet.conf I am using a TDMA_CYCLE of 10ms and a TDMA_OFFSET of 
100us. This is due to the fact that the frame I require is 100ms 
long with 100us slots. However with these settings I get round 
trip times that flactuate between just below 10000us up to 20000us 
when I run the round trip example (addons/examples/round-trip) 
with an interval of 10 ms and a packetsize of 512 bytes. Is there 
something I am doing incorrectly as these times seem to be quite high?

My current system configuration is:
2 x P4 256MB 750Mhz, RTL 8139D NIC, RTAI 3.0r4, RTnet 0.8.3, 
linux adeos kernel 2.4.25.

Any and all help would be greatly appreciated

Seshan Govender  
 

*******************************************************************************************************
Disclaimer:  The information contained in this communication is confidential 
and may be legally privileged.  
It is intended solely for the use of the individual or entity to whom it is 
addressed and others authorised to receive it.  
Any review, retransmission, dissemination, copying, disclosure or other use of, 
or taking of any action in reliance upon, this information by person or 
entities other then the intended recipient is prohibited.  
If you have received this message in error, please notify the sender 
immediately by e-mail, facsimile or telephone and return and/or destroy the 
original message and all copies from any computer.  

Denel (Pty) Ltd exercises no editorial control over e-mail messages originating 
in the organisation and does not accept any responsibility for either the 
contents of the message or any copyright laws that may have been violated by 
the person sending this message.  
Denel (Pty) Ltd is neither liable for the proper and complete transmission of 
the information contained in this communication nor any delay in its receipt.  
This message should not be copied or used for any purpose other than intended, 
nor should it be disclosed to any other person.
*******************************************************************************************************



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&op=click
_______________________________________________
RTnet-users mailing list
RTnet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/rtnet-users

Reply via email to