> You could try rtroute solict as well, first from master to slave, then
> the other way around. This also indicates if there is any communication
> at all (one direction should work as we saw). Check /proc/xenomai/irq if
> something happens, and on which side.
>
>
>
If I have understand you right, I shall look whether an interrupt was
triggert at the other target after a arp request with rtroute solicit?
This is Target #2
BusyBox v1.01 (Slind 1:1.01-2.slind1) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
kontron_xenomai:~# start_rtnet.sh
Using /usr/local/rtnet/modules/rtnet.ko
Using /usr/local/rtnet/modules/rtipv4.ko
Using /usr/local/rtnet/modules/rtpacket.ko
Using /usr/local/rtnet/modules/rt_loopback.ko
Using /usr/local/rtnet/modules/rt_tulip.ko
rtlo Medium: Local Loopback
IP address: 127.0.0.1
UP LOOPBACK RUNNING MTU: 1500
rteth1 Medium: Ethernet Hardware address: 00:E0:4B:0E:3D:2B
IP address: 10.0.0.1 Broadcast address: 10.255.255.255
UP BROADCAST RUNNING MTU: 1500
kontron_xenomai:~# cat /proc/xenomai/irq
IRQ CPU0
0: 9515
11: 1
34: 2
kontron_xenomai:~#
-----------------------------------------------------------------------------------
This is Target #1
BusyBox v1.01 (Slind 1:1.01-2.slind1) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
kontron_xenomai:~# start_rtnet.sh
Using /usr/local/rtnet/modules/rtnet.ko
Using /usr/local/rtnet/modules/rtipv4.ko
Using /usr/local/rtnet/modules/rtpacket.ko
Using /usr/local/rtnet/modules/rt_loopback.ko
Using /usr/local/rtnet/modules/rt_tulip.ko
rtlo Medium: Local Loopback
IP address: 127.0.0.1
UP LOOPBACK RUNNING MTU: 1500
rteth1 Medium: Ethernet Hardware address: 00:E0:4B:0E:3D:29
IP address: 10.0.0.2 Broadcast address: 10.255.255.255
UP BROADCAST RUNNING MTU: 1500
kontron_xenomai:~# cat /proc/xenomai/irq
IRQ CPU0
0: 22195
11: 1
34: 2
kontron_xenomai:~# rtroute solicit 10.0.0.1 dev rteth1
kontron_xenomai:~# cat /proc/xenomai/irq
IRQ CPU0
0: 30061
11: 2
34: 3
kontron_xenomai:~#
-------------------------------------------------------------------------------
This is Target #2
kontron_xenomai:~# cat /proc/xenomai/irq
IRQ CPU0
0: 33878
11: 1
34: 2
-> No interrupt was triggert at the other target. The other way around
the same.
But local there is one on rx and tx after rtroute - see above. Did I
understand something wrong?
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
RTnet-users mailing list
RTnet-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/rtnet-users
