Hi Gilles, Gilles Chanteperdrix wrote: > On Mon, May 5, 2008 at 2:47 PM, Wolfgang Grandegger <[EMAIL PROTECTED]> wrote: >> With this patch non-real-time UDP packets a routed to the Linux >> network stack. You can enable this feature with the configure >> option "--enable-proxy-udp". > > I am interested by this patch since I use a similar feature. Is the > rtnet-proxy a per-interface thing, or is there only one rtnet-proxy > interface in the system ?
As-is, one Linux network device named rtproxy will be created when loading rtnetproxy.ko. All in-coming non-real-time IP packets (TCP or UDP) from any RTnet interface will be forwarded to rtproxy. Out-going packets will be routed according to the RTnet routing table: http://www.rts.uni-hannover.de/rtnet/lxr/source/addons/rtnetproxy.c#211 If using the "[PATCH/RFC 2/5] RTnet-Proxy: ARP support", the rtproxy Linux device gets attached directly to the RTnet device specified via module parameter "rtdev_attach". Well, I'm just using one network device and did not think yet further. But it might make sense to have more than one rtproxy Linux network device and attach them to the corresponding RTnet device. What is your setup/requirement. Wolfgang. ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
