Hi, On 2014年10月03日 01:17, Michele Santuari wrote: > Hi, > I want to test an HP switch and I am using the Ryu Switch Test Tool. > My configuration is the following and shown in the attached pdf: > I am using an Open vSwitch as a tester switch and a server hosts both the > Open vSwitch and the Ryu test. I use three physical ethernet interfaces of > the server to connected the HP switch. These three physical interfaces of the > server are assigned to the Open vSwitch instance. Both the Open vSwitch and > HP switches are connected to the management network to communicate with the > controller. > > The test works (e.g., Switch connected, some tests are ok, other fails…), but > I do not really if this configuration is correct and if the OvS can influence > the result of the test. > Thanks and best regards,
First, please check the test results and the configuration at Ryu Certification HP. It may be helpful for your tests. Test results: http://osrg.github.io/ryu-certification/switch/Hewlett-Packard_HP2920 Configuration: http://osrg.github.io/ryu-certification/switch/config/Hewlett-Packard_HP2920.html If you find significant differences in your results, please send information (like logs, failed test case,...) to Ryu-devel. > > > Michele Santuari > CREATE-NET > Junior Research Engineer > Via alla Cascata 56/D - 38123 Povo Trento (Italy) > e-mail: [email protected] > <mailto:[email protected]> > Tel: (+39) 0461 408400 - interno/extension 1341 > Skype: s4nto.m > www.create-net.org <http://www.create-net.org> > -------------------------------------------------------- > The information transmitted is intended only for the person or entity to > which it is addressed and may contain confidential and/or privileged > material. Any review, retransmission, dissemination or other use of, or > taking of any action in reliance upon, this information by persons or > entities other than the intended recipient is prohibited according to the > Italian Law 196/2003 of the Legislature. If you received this in error, > please contact the sender and delete the material from any computer. > > > > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk > > > > _______________________________________________ > Ryu-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/ryu-devel > ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Ryu-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/ryu-devel
