Hi Iwase, I'm couldnt find how to find out the ovs version on mininet as I'm not running a vm. Also I checked the flows configured on the OpenVswitches and the action on the bpdu's whose destination addr=01:80:c2:00:00:0e, is to send it back to the controller. And ya the openflow version is 1.3 . The ovs version is 2.0.2 on the switches and on the computer I use to run the mininet.
Any idea on what the solution might be? Mit freundlichen Grüßen / Best regards Harsha Vardhan Communication Technology (CR/AEH4) fixed-term.harsha.vard...@de.bosch.com -----Ursprüngliche Nachricht----- Von: Yusuke Iwase [mailto:iwase.yusu...@gmail.com] Gesendet: Freitag, 17. April 2015 07:19 An: FIXED-TERM Vardhan Harsha (CR/AEH4) Cc: ryu-devel@lists.sourceforge.net Betreff: Re: [Ryu-devel] Stp on Openvswitch Hi Vardhan, > Also I would be grateful if could share your simple_switch_stp_13.py program > with me. I used the attached simple_switch_stp_13.py, and modified bpdu.py as written in the Ryu-Book. for the topology on the mininet, refer to the attached spanning_tree.py. > I ran tcpdump on the switches but they don’t see any bpdu packets ,infact > they they don’t see any packets at all. Does the switches get the Packet-Out message from the controller? If the switches get that messages and does not transfer them, it might be the problem of the switches(or thier settings). Please check the version of your OVS, whether it matches with the version of OVS on your mininet. Additionally, because simple_switch_stp_13.py uses OpenFlow version 1.3, please confirm the OpenFlow version of your switches. Thanks, Iwase On 2015年04月16日 17:52, FIXED-TERM Vardhan Harsha (CR/AEH4) wrote: > Hi Iwase, > > I ran tcpdump on the switches but they don’t see any bpdu packets ,infact > they they don’t see any packets at all. > I also switched to simple_switch_stp_13 as it seemed a better option. > And when I checked the ryu log ,it shows that ryu is just blocking a port on > the switches then disabling it. > > So I'm adding the ryu log: > $ PYTHONPATH= ./bin/ryu-manager --observe-links --verbose > ryu/app/simple_switch_stp_13.py > loading app ryu/app/simple_switch_stp_13.py > > EVENT ofp_event->stplib EventOFPStateChange > [STP][INFO] dpid=00000010f33acafb: Join as stp bridge. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Start port state machine. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > [dpid=00000010f33acafb][port=2] state=LISTEN > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Start port state machine. > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=2] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=2] state=DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / DISABLE > [STP][DEBUG] dpid=00000010f33acb09: [port=1] Send Config BPDU. > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > EVENT ofp_event->stplib EventOFPPacketIn > EVENT ofp_event->stplib EventOFPPacketIn > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=2] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=2] Send Config BPDU. > [dpid=00000010f33aca7b][port=2] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > [dpid=00000010f33aca7b][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acb09: [port=1] Send Config BPDU. > [dpid=00000010f33acb09][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=2] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=2] state=DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / DISABLE > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acb09][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > [dpid=00000010f33aca7b][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPacketIn > [STP][INFO] dpid=00000010f33aca7b: [port=1] Receive superior BPDU. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=1] state=BLOCK > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / BLOCK > [STP][INFO] dpid=00000010f33aca7b: Root bridge. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > [dpid=00000010f33aca7b][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=2] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acb09: [port=2] Send Config BPDU. > [dpid=00000010f33acb09][port=2] state=LISTEN > [STP][INFO] dpid=00000010f33acb09: [port=2] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acb09: [port=1] Send Config BPDU. > [dpid=00000010f33acb09][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acb09][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / DISABLE > [STP][INFO] dpid=00000010f33acb09: [port=2] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acb09][port=2] state=DISABLE > [STP][INFO] dpid=00000010f33acb09: [port=2] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > [dpid=00000010f33aca7b][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPacketIn > [STP][INFO] dpid=00000010f33acafb: [port=1] Receive superior BPDU. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=BLOCK > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / BLOCK > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=2] state=BLOCK > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / BLOCK > [STP][INFO] dpid=00000010f33acafb: Non root bridge. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=1] ROOT_PORT / LISTEN > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > [dpid=00000010f33acafb][port=2] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / DISABLE > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=2] state=BLOCK > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / BLOCK > EVENT stplib->SimpleSwitch13 EventTopologyChange > [STP][INFO] dpid=00000010f33acafb: Root bridge. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb] Receive topology change event. Flush MAC table. > [dpid=00000010f33acafb][port=2] state=LISTEN > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=2] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acb09: [port=2] Send Config BPDU. > [dpid=00000010f33acb09][port=2] state=LISTEN > [STP][INFO] dpid=00000010f33acb09: [port=2] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=2] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acb09][port=2] state=DISABLE > [STP][INFO] dpid=00000010f33acb09: [port=2] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > [dpid=00000010f33aca7b][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > EVENT ofp_event->stplib EventOFPPacketIn > [STP][INFO] dpid=00000010f33acafb: [port=1] Receive superior BPDU. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=BLOCK > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / BLOCK > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=2] state=BLOCK > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / BLOCK > [STP][INFO] dpid=00000010f33acafb: Non root bridge. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=1] ROOT_PORT / LISTEN > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > [dpid=00000010f33acafb][port=2] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / DISABLE > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=2] state=BLOCK > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / BLOCK > EVENT stplib->SimpleSwitch13 EventTopologyChange > [STP][INFO] dpid=00000010f33acafb: Root bridge. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb] Receive topology change event. Flush MAC table. > [dpid=00000010f33acafb][port=2] state=LISTEN > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=2] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=2] Send Config BPDU. > [dpid=00000010f33aca7b][port=2] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / LISTEN > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > [dpid=00000010f33aca7b][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=2] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7bsorry for][port=2] state=DISABLE > [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acb09: [port=1] Send Config BPDU. > [dpid=00000010f33acb09][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acafb][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / DISABLE > [STP][DEBUG] dpid=00000010f33acafb: [port=2] Send Config BPDU. > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=1] Link down. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33acb09][port=1] state=DISABLE > [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / DISABLE > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > [dpid=00000010f33aca7b][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acafb: [port=1] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. > [dpid=00000010f33acafb][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPacketIn > [STP][INFO] dpid=00000010f33aca7b: [port=1] Receive superior BPDU. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [dpid=00000010f33aca7b][port=1] state=BLOCK > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / BLOCK > [STP][INFO] dpid=00000010f33aca7b: Root bridge. > EVENT stplib->SimpleSwitch13 EventPortStateChange > [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. > [dpid=00000010f33aca7b][port=1] state=LISTEN > [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN > EVENT ofp_event->stplib EventOFPPortStatus > [STP][INFO] dpid=00000010f33acb09: [port=2] Link up. > EVENT stplib->SimpleSwitch13 EventPortStateChange > > Sorry for the long mail. > Any idea about what might be causing this. > Also I would be grateful if could share your simple_switch_stp_13.py program > with me. > > PS:I followed the Ryu book to write the simple_switch_stp_13.py > > Mit freundlichen Grüßen / Best regards > > Harsha Vardhan > Communication Technology (CR/AEH4) > > fixed-term.harsha.vard...@de.bosch.com > > > > -----Ursprüngliche Nachricht----- > Von: Yusuke Iwase [mailto:iwase.yusu...@gmail.com] > Gesendet: Donnerstag, 16. April 2015 04:02 > An: FIXED-TERM Vardhan Harsha (CR/AEH4) > Cc: ryu-devel@lists.sourceforge.net > Betreff: Re: [Ryu-devel] Stp on Openvswitch > > Hi Vardhan, > > Hmm... > > Could you capture the packets on the configured switch, > and confirm that switches are sending and receiving STP packets? > Because the notification messages have not been seen on the log, > which messages show the switch received STP packets (BPDU). > > e.g.) the notification message > [STP][INFO] dpid=0000000000000001: [port=1] Receive superior BPDU. > > Thanks, > Iwase > > > On 2015年04月15日 17:05, FIXED-TERM Vardhan Harsha (CR/AEH4) wrote: >> Hi Iwase, >> >> In the current config only three switches which are specified are connecting. >> There was an error before which has now been sorted. >> >> Mit freundlichen Grüßen / Best regards >> >> Harsha Vardhan >> Communication Technology (CR/AEH4) >> >> fixed-term.harsha.vard...@de.bosch.com >> >> >> >> -----Ursprüngliche Nachricht----- >> Von: Yusuke Iwase [mailto:iwase.yusu...@gmail.com] >> Gesendet: Mittwoch, 15. April 2015 09:39 >> An: FIXED-TERM Vardhan Harsha (CR/AEH4) >> Cc: ryu-devel@lists.sourceforge.net >> Betreff: Re: [Ryu-devel] Stp on Openvswitch >> >> Hi Vardhan, >> >> How is your topology including the two extra switches? >> >> In case like the following, please check whether the extra switch drops >> STP packets from the specified switches or not. >> >> e.g.) >> specified-switch ---- extra-switch ---- specified-switch >> | >> | >> specified-switch >> >> >> As far as I know, if the extra switch is Open vSwitch(OVS), >> OVS does not forward STP packets (BPDU) by default. >> I think you need the following settings. >> >> $ ovs-vsctl set bridge [extra-switch-name] other-config:forward-bpdu=true >> >> The source: ovs-git mailing list >> http://openvswitch.org/pipermail/git/2011-August/001692.html >> >> Thanks, >> Iwase >> >> On 2015年04月15日 15:57, FIXED-TERM Vardhan Harsha (CR/AEH4) wrote: >>> Hi Iwase, >>> >>> I sorted out the problem now only three switches join the Ryu stp, for >>> which I have specified the dpid's. >>> But they are still being disabled. >>> I can't figure out why. >>> Any insight or solution? >>> >>> >>> Mit freundlichen Grüßen / Best regards >>> >>> Harsha Vardhan >>> Communication Technology (CR/AEH4) >>> >>> fixed-term.harsha.vard...@de.bosch.com >>> >>> >>> >>> -----Ursprüngliche Nachricht----- >>> Von: Yusuke Iwase [mailto:iwase.yusu...@gmail.com] >>> Gesendet: Mittwoch, 15. April 2015 04:36 >>> An: FIXED-TERM Vardhan Harsha (CR/AEH4) >>> Cc: ryu-devel@lists.sourceforge.net >>> Betreff: Re: [Ryu-devel] Stp on Openvswitch >>> >>> Hi Vardhan, >>> >>>> I think this switch is the reason why there are two extra dpid's being >>>> produced . >>>> But this shouldn’t interfere with the stp, right?. >>> >>> I can not say "Yes" with confidence. >>> I think it's depending on your topology including the two extra switches, >>> because they are connecting to the controller. >>> >>> Thanks, >>> Iwase >>> >>> On 2015年04月14日 21:28, FIXED-TERM Vardhan Harsha (CR/AEH4) wrote: >>>> Hi Iwase , >>>> >>>> Thank you for your prompt reply. Yes I'm talking about those dpid's. >>>> >>>> As I said before I have 3 OVS switches running on three separate machines >>>> and all of them are connected to the controller running on a different >>>> machine through a normal switch. >>>> >>>> I think this switch is the reason why there are two extra dpid's being >>>> produced . >>>> But this shouldn’t interfere with the stp, right?. >>>> Then why are the ports on my Ovs switches still being Disabled as shown in >>>> the previous log. >>>> >>>> If you have any idea please let me know. >>>> >>>> Mit freundlichen Grüßen / Best regards >>>> >>>> Harsha Vardhan >>>> Communication Technology (CR/AEH4) >>>> >>>> fixed-term.harsha.vard...@de.bosch.com >>>> >>>> >>>> -----Ursprüngliche Nachricht----- >>>> Von: Yusuke Iwase [mailto:iwase.yusu...@gmail.com] >>>> Gesendet: Dienstag, 14. April 2015 05:03 >>>> An: FIXED-TERM Vardhan Harsha (CR/AEH4) >>>> Cc: ryu-devel@lists.sourceforge.net >>>> Betreff: Re: AW: [Ryu-devel] Stp on Openvswitch >>>> >>>> Hi Vardhan, >>>> >>>> Please keep the mailing list. >>>> Ryu-devel <ryu-devel@lists.sourceforge.net> >>>> >>>>> but it still doesn't use the dpid which I configured. >>>> >>>> From the log, it seems 4 switches are in your topology as following. >>>> >>>> [STP][INFO] dpid=0000000000000004: Join as stp bridge. >>>> [STP][INFO] dpid=0000000000000003: Join as stp bridge. >>>> [STP][INFO] dpid=00000010f33aca7b: Join as stp bridge. >>>> [STP][INFO] dpid=00000010f33acb09: Join as stp bridge. >>>> >>>> You mean "dpid=0000000000000004 and dpid=0000000000000003 should not join >>>> into STP network", right? >>>> >>>> If so, simple_switch_stp.py joins all the switch which connecting to the >>>> conntroller into STP network. >>>> Even if you omit stplib.Stp.set_config() for the particular switch, >>>> the switch is configured by the default value. >>>> (https://github.com/osrg/ryu/blob/master/ryu/lib/stplib.py#L197-L231) >>>> >>>> Thanks, >>>> Iwase >>>> >>>> On 2015年04月14日 00:03, FIXED-TERM Vardhan Harsha (CR/AEH4) wrote: >>>>> Hi Iwase, >>>>> >>>>> Ignore my previous mail. Stp application loaded perfectly. I had made >>>>> some error so now the application runs perfectly but it still doesn’t use >>>>> the dpid which I configured. >>>>> >>>>> So here is the log : >>>>> >>>>> $ PYTHONPATH= ./bin/ryu-manager --observe-links --verbose >>>>> ryu/app/simple_switch_stp.py ryu/app/rest_topology.py >>>>> loading app ryu/app/simple_switch_stp.py >>>>> ............................................... >>>>> ........ >>>>> ........................................ >>>>> ................ >>>>> >>>>> [STP][INFO] dpid=0000000000000004: Join as stp bridge. >>>>> [STP][INFO] dpid=0000000000000003: Join as stp bridge. >>>>> [STP][INFO] dpid=00000010f33aca7b: Join as stp bridge. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. >>>>> [dpid=00000010f33aca7b][port=1] state=LISTEN >>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Start port state machine. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN >>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=2] Send Config BPDU. >>>>> [dpid=00000010f33aca7b][port=2] state=LISTEN >>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=2] Start port state machine. >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / LISTEN >>>>> EVENT ofp_event->switches EventOFPPortStatus >>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [dpid=00000010f33aca7b][port=1] state=DISABLE >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE >>>>> EVENT ofp_event->switches EventOFPPortStatus >>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] Link down. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [dpid=00000010f33aca7b][port=2] state=DISABLE >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / DISABLE >>>>> [STP][INFO] dpid=00000010f33acb09: Join as stp bridge. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=1] Send Config BPDU. >>>>> [dpid=00000010f33acb09][port=1] state=LISTEN >>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=1] Start port state machine. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / LISTEN >>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=2] Send Config BPDU. >>>>> [dpid=00000010f33acb09][port=2] state=LISTEN >>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=2] Start port state machine. >>>>> [STP][INFO] dpid=00000010f33acb09: [port=2] DESIGNATED_PORT / LISTEN >>>>> EVENT ofp_event->switches EventOFPPortStatus >>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] Link down. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [dpid=00000010f33acb09][port=1] state=DISABLE >>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / DISABLE >>>>> EVENT ofp_event->switches EventOFPPortStatus >>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. >>>>> [dpid=00000010f33aca7b][port=1] state=LISTEN >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN >>>>> EVENT ofp_event->switches EventOFPPortStatus >>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [dpid=00000010f33aca7b][port=1] state=DISABLE >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE >>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=2] Send Config BPDU. >>>>> EVENT ofp_event->switches EventOFPPortStatus >>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] Link up. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=2] Send Config BPDU. >>>>> [dpid=00000010f33aca7b][port=2] state=LISTEN >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / LISTEN >>>>> EVENT ofp_event->switches EventOFPPortStatus >>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. >>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. >>>>> [dpid=00000010f33aca7b][port=1] state=LISTEN >>>>> >>>>> And here is the code change in simple_switch_stp.py: >>>>> >>>>> class SimpleSwitchStp(app_manager.RyuApp): >>>>> OFP_VERSIONS = [ofproto_v1_0.OFP_VERSION] >>>>> _CONTEXTS = {'stplib': stplib.Stp} >>>>> def __init__(self, *args, **kwargs): >>>>> super(SimpleSwitchStp, self).__init__(*args, **kwargs) >>>>> self.mac_to_port = {} >>>>> self.stp = kwargs['stplib'] >>>>> # Sample of stplib config. >>>>> # please refer to stplib.Stp.set_config() for details. >>>>> config = { >>>>> dpid_lib.str_to_dpid('00000010f33acafb'): >>>>> {'bridge': {'priority': 0xa000}}, >>>>> dpid_lib.str_to_dpid('00000010f33aca7b'): >>>>> {'bridge': {'priority': 0xa000}}, >>>>> dpid_lib.str_to_dpid('00000010f33acb09'): >>>>> {'bridge': {'priority': 0xa000}}} >>>>> self.stp.set_config(config) >>>>> >>>>> >>>>> >>>>> >>>>> Mit freundlichen Grüßen / Best regards >>>>> >>>>> Harsha Vardhan >>>>> Communication Technology (CR/AEH4) >>>>> >>>>> fixed-term.harsha.vard...@de.bosch.com >>>>> >>>>> >>>>> >>>>> -----Ursprüngliche Nachricht----- >>>>> Von: Yusuke Iwase [mailto:iwase.yusu...@gmail.com] >>>>> Gesendet: Montag, 13. April 2015 02:01 >>>>> An: FIXED-TERM Vardhan Harsha (CR/AEH4); ryu-devel@lists.sourceforge.net >>>>> Betreff: Re: [Ryu-devel] Stp on Openvswitch >>>>> >>>>> Hi Vardhan, >>>>> >>>>> >>>>> Thank you for sending the log. >>>>> It seemed that dpid is not matching. >>>>> >>>>>> EVENT ofp_event->stplib EventOFPStateChange >>>>>> [STP][INFO] dpid=0000000000000004: Join as stp bridge. >>>>>> [STP][INFO] dpid=0000000000000002: Join as stp bridge. >>>>>> [STP][INFO] dpid=0000000000000001: Join as stp bridge. >>>>> ... >>>>>> EVENT ofp_event->stplib EventOFPStateChange >>>>>> [STP][INFO] dpid=00000010f33acb09: Join as stp bridge. >>>>> ... >>>>> >>>>> >>>>> Please remove the following comment-out and specify dpid in accordance >>>>> with your environment. >>>>> >>>>> (https://github.com/osrg/ryu/blob/master/ryu/app/simple_switch_stp.py#L38-L47) >>>>> >>>>> Because simple_switch_stp.py is the sample application, dpid needs to be >>>>> specified. >>>>> >>>>> >>>>> Thanks, >>>>> Iwase >>>>> >>>>> On 2015年04月10日 18:27, FIXED-TERM Vardhan Harsha (CR/AEH4) wrote: >>>>>> Hi Iwase, >>>>>> >>>>>> When I use mininet to simulate the switches the RYU STP application work >>>>>> flawlessly. >>>>>> But while using Ovs switches on hardware the problems arises. >>>>>> >>>>>> Here is RYU-manager log: >>>>>> >>>>>> PYTHONPATH= ./bin/ryu-manager --observe-links --verbose >>>>>> ryu/app/simple_switch_stp.py >>>>>> loading app ryu/app/simple_switch_stp.py >>>>>> loading app ryu.controller.ofp_handler >>>>>> ... >>>>>> EVENT ofp_event->stplib EventOFPStateChange >>>>>> [STP][INFO] dpid=0000000000000004: Join as stp bridge. >>>>>> [STP][INFO] dpid=0000000000000002: Join as stp bridge. >>>>>> [STP][INFO] dpid=0000000000000001: Join as stp bridge. >>>>>> >>>>>> EVENT ofp_event->stplib EventOFPStateChange >>>>>> [STP][INFO] dpid=00000010f33acb09: Join as stp bridge. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=1] Send Config BPDU. >>>>>> [dpid=00000010f33acb09][port=1] state=LISTEN >>>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=1] Start port state machine. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / LISTEN >>>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=2] Send Config BPDU. >>>>>> [dpid=00000010f33acb09][port=2] state=LISTEN >>>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=2] Start port state machine. >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=2] DESIGNATED_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acafb][port=1] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / DISABLE >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acb09][port=1] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / DISABLE >>>>>> EVENT ofp_event->stplib EventOFPStateChange >>>>>> [STP][INFO] dpid=00000010f33aca7b: Join as stp bridge. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. >>>>>> [dpid=00000010f33aca7b][port=1] state=LISTEN >>>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Start port state machine. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN >>>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=2] Send Config BPDU. >>>>>> [dpid=00000010f33aca7b][port=2] state=LISTEN >>>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=2] Start port state machine. >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33aca7b][port=1] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33aca7b][port=2] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / DISABLE >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=2] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acafb][port=2] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=2] DESIGNATED_PORT / DISABLE >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=2] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acb09][port=2] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=2] DESIGNATED_PORT / DISABLE >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] Link up. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. >>>>>> [dpid=00000010f33acafb][port=1] state=LISTEN >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. >>>>>> [dpid=00000010f33aca7b][port=1] state=LISTEN >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPacketIn >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] Receive superior BPDU. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acafb][port=1] state=BLOCK >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / BLOCK >>>>>> [STP][INFO] dpid=00000010f33acafb: Non root bridge. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acafb][port=1] state=LISTEN >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] ROOT_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] Link up. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][DEBUG] dpid=00000010f33acb09: [port=1] Send Config BPDU. >>>>>> [dpid=00000010f33acb09][port=1] state=LISTEN >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] Link up. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=2] Send Config BPDU. >>>>>> [dpid=00000010f33aca7b][port=2] state=LISTEN >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acafb][port=1] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / DISABLE >>>>>> EVENT stplib->SimpleSwitchStp EventTopologyChange >>>>>> [STP][INFO] dpid=00000010f33acafb: Root bridge. >>>>>> [dpid=00000010f33acafb] Receive topology change event. Flush MAC table. >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33aca7b][port=1] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33aca7b][port=2] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=2] DESIGNATED_PORT / DISABLE >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acb09][port=1] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33acb09: [port=1] DESIGNATED_PORT / DISABLE >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link up. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][DEBUG] dpid=00000010f33aca7b: [port=1] Send Config BPDU. >>>>>> [dpid=00000010f33aca7b][port=1] state=LISTEN >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] Link up. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [STP][DEBUG] dpid=00000010f33acafb: [port=1] Send Config BPDU. >>>>>> [dpid=00000010f33acafb][port=1] state=LISTEN >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / LISTEN >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33aca7b][port=1] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33aca7b: [port=1] DESIGNATED_PORT / DISABLE >>>>>> EVENT ofp_event->stplib EventOFPPortStatus >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] Link down. >>>>>> EVENT stplib->SimpleSwitchStp EventPortStateChange >>>>>> [dpid=00000010f33acafb][port=1] state=DISABLE >>>>>> [STP][INFO] dpid=00000010f33acafb: [port=1] DESIGNATED_PORT / >>>>>> DISABLE. >>>>>> >>>>>> Is it an Ovs bug because as I have understood , Ovs drops the BPDU >>>>>> packets if STP isn’t enabled on the switch. >>>>>> Anyways hope the log helps figure out the problem. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Mit freundlichen Grüßen / Best regards >>>>>> >>>>>> Harsha Vardhan >>>>>> Communication Technology (CR/AEH4) >>>>>> >>>>>> fixed-term.harsha.vard...@de.bosch.com >>>>>> >>>>>> >>>>>> -----Ursprüngliche Nachricht----- >>>>>> Von: Yusuke Iwase [mailto:iwase.yusu...@gmail.com] >>>>>> Gesendet: Freitag, 10. April 2015 05:01 >>>>>> An: FIXED-TERM Vardhan Harsha (CR/AEH4) >>>>>> Cc: ryu-devel@lists.sourceforge.net >>>>>> Betreff: Re: [Ryu-devel] Stp on Openvswitch >>>>>> >>>>>> Hi Vardhan, >>>>>> >>>>>> In my environment (on mininet), simple_switch_stp_13.py works well. >>>>>> >>>>>> >>>>>> $ ovs-vsctl --version >>>>>> ovs-vsctl (Open vSwitch) 2.3.90 >>>>>> Compiled Apr 6 2015 16:38:58 >>>>>> DB Schema 7.12.1 >>>>>> $ >>>>>> >>>>>> >>>>>> $ git diff >>>>>> diff --git a/ryu/lib/packet/bpdu.py b/ryu/lib/packet/bpdu.py >>>>>> index 8926b2a..1453434 100644 >>>>>> --- a/ryu/lib/packet/bpdu.py >>>>>> +++ b/ryu/lib/packet/bpdu.py >>>>>> @@ -134,7 +134,7 @@ from ryu.lib import addrconv >>>>>> >>>>>> >>>>>> # BPDU destination >>>>>> -BRIDGE_GROUP_ADDRESS = '01:80:c2:00:00:00' >>>>>> +BRIDGE_GROUP_ADDRESS = '01:80:c2:00:00:0e' >>>>>> >>>>>> >>>>>> PROTOCOL_IDENTIFIER = 0 >>>>>> $ >>>>>> >>>>>> >>>>>> $ sudo python setup.py install >>>>>> ... >>>>>> running install_scripts >>>>>> Installing ryu-manager script to /usr/local/bin >>>>>> Installing ryu script to /usr/local/bin >>>>>> $ >>>>>> >>>>>> >>>>>> $ sudo ryu-manager simple_switch_stp_13.py >>>>>> [sudo] password for ryu: >>>>>> loading app simple_switch_stp_13.py >>>>>> loading app ryu.controller.ofp_handler >>>>>> instantiating app None of Stp >>>>>> creating context stplib >>>>>> instantiating app simple_switch_stp_13.py of SimpleSwitch13 >>>>>> instantiating app ryu.controller.ofp_handler of OFPHandler >>>>>> [STP][INFO] dpid=0000000000000001: Join as stp bridge. >>>>>> ... >>>>>> ... >>>>>> [STP][INFO] dpid=0000000000000002: [port=1] DESIGNATED_PORT / FORWARD >>>>>> [STP][INFO] dpid=0000000000000002: [port=2] ROOT_PORT / FORWARD >>>>>> [STP][INFO] dpid=0000000000000002: [port=3] DESIGNATED_PORT / FORWARD >>>>>> [STP][INFO] dpid=0000000000000003: [port=1] DESIGNATED_PORT / FORWARD >>>>>> [STP][INFO] dpid=0000000000000003: [port=3] ROOT_PORT / FORWARD >>>>>> [STP][INFO] dpid=0000000000000003: [port=2] NON_DESIGNATED_PORT / BLOCK >>>>>> [STP][INFO] dpid=0000000000000001: [port=1] DESIGNATED_PORT / FORWARD >>>>>> [STP][INFO] dpid=0000000000000001: [port=2] DESIGNATED_PORT / FORWARD >>>>>> ... >>>>>> $ >>>>>> >>>>>> >>>>>> Would you mind sending us ryu-manager log as above? >>>>>> >>>>>> >>>>>> Thanks, >>>>>> Iwase >>>>>> >>>>>> On 2015年04月09日 19:08, FIXED-TERM Vardhan Harsha (CR/AEH4) wrote: >>>>>>> Hello All , >>>>>>> >>>>>>> I have looped network with 3 computers running OpenVswitch version >>>>>>> 2.0.2 and 2 host. so the network is as shown below. >>>>>>> s1---------- >>>>>>> | | >>>>>>> h1----s2----------s3---h2 >>>>>>> Ryu is running the STP application. I have also made changes in the >>>>>>> source code of the bpdu changing their destination address as suggested >>>>>>> previously. >>>>>>> But still the stp application doesn’t work and it blocks all the ports. >>>>>>> >>>>>>> Can anyone please suggest a solution or guide me in the right >>>>>>> direction. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Mit freundlichen Grüßen / Best regards >>>>>>> >>>>>>> *Harsha Vardhan * >>>>>>> Communication Technology (CR/AEH4) >>>>>>> >>>>>>> _fixed-term.Harsha.Vardhan@de.bosch.com_ >>>>>>> <mailto:fixed-term.harsha.vard...@de.bosch.com> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ------------------------------------------------------------------------------ >>>>>>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>>>>>> Develop your own process in accordance with the BPMN 2 standard >>>>>>> Learn Process modeling best practices with Bonita BPM through live >>>>>>> exercises >>>>>>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- >>>>>>> event?utm_ >>>>>>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Ryu-devel mailing list >>>>>>> Ryu-devel@lists.sourceforge.net >>>>>>> https://lists.sourceforge.net/lists/listinfo/ryu-devel >>>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>>>>> Develop your own process in accordance with the BPMN 2 standard >>>>>> Learn Process modeling best practices with Bonita BPM through live >>>>>> exercises >>>>>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- >>>>>> event?utm_ >>>>>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>>>>> _______________________________________________ >>>>>> Ryu-devel mailing list >>>>>> Ryu-devel@lists.sourceforge.net >>>>>> https://lists.sourceforge.net/lists/listinfo/ryu-devel >>>>>> >>>> ------------------------------------------------------------------------------ >>>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>>> Develop your own process in accordance with the BPMN 2 standard >>>> Learn Process modeling best practices with Bonita BPM through live >>>> exercises >>>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ >>>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>>> _______________________________________________ >>>> Ryu-devel mailing list >>>> Ryu-devel@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/ryu-devel >>>> >>> ------------------------------------------------------------------------------ >>> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >>> Develop your own process in accordance with the BPMN 2 standard >>> Learn Process modeling best practices with Bonita BPM through live exercises >>> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ >>> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >>> _______________________________________________ >>> Ryu-devel mailing list >>> Ryu-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/ryu-devel >>> >> ------------------------------------------------------------------------------ >> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT >> Develop your own process in accordance with the BPMN 2 standard >> Learn Process modeling best practices with Bonita BPM through live exercises >> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ >> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF >> _______________________________________________ >> Ryu-devel mailing list >> Ryu-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/ryu-devel >> > ------------------------------------------------------------------------------ > BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT > Develop your own process in accordance with the BPMN 2 standard > Learn Process modeling best practices with Bonita BPM through live exercises > http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ > source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF > _______________________________________________ > Ryu-devel mailing list > Ryu-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ryu-devel > ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Ryu-devel mailing list Ryu-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ryu-devel
