Hi Iwase,
Sorry for the late answer
well... I checked the group stats as you said and it's not being looked up
*ovs-ofctl dump-group-stats -O OpenFlow s2*
*OFPST_GROUP reply (OF1.3) (xid=0x2):*
*group_id=1,duration=12.837s,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0,byte_count=0,bucket1:packet_count=0,byte_count=0*
I'm really lost and don't know how to fix that
Do you have any idea of how can I solve this problem?
many thanks.
2018-03-29 1:33 GMT-03:00 Iwase Yusuke <iwase.yusu...@gmail.com>:
> Hi Carlos,
>
> The group entries are looked up (or specified) by OFPActionGroup in flow
> entries.
>
> If looked up, ref_count, packet_count and byte_count should be incremented.
>
> mininet> sh ovs-ofctl dump-group-stats s1 -O OpenFlow13
> OFPST_GROUP reply (OF1.3) (xid=0x4):
> group_id=1,duration=45.105s,ref_count=1,packet_count=5,byte_
> count=378,bucket0:packet_count=4,byte_count=336,bucket1:
> packet_count=1,byte_count=42
>
> Thanks,
> Iwase
>
>
> On 2018年03月27日 23:10, Jose Carlos Ferreira de Melo Junior wrote:
>
>> Hi Iwase,
>>
>> The group entry is added...
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> but I don't understand how can be looked up.
>> I don't know how to do this
>>
>>
>> Is there any other thing that I am missing ????
>>
>>
>> thanks in advanced
>>
>>
>>
>>
>>
>>
>>
>> 2018-03-26 20:28 GMT-03:00 Iwase Yusuke <iwase.yusu...@gmail.com <mailto:
>> iwase.yusu...@gmail.com>>:
>>
>> Hi Carlos,
>>
>> > "*/using the group table with openflow 1.3 with no sucess/*"
>> means that I am
>> > using the group table as i said before and it is not working, means
>> that I am
>> > using the group specification and it doens't work.
>>
>> "Does not work" means
>> - no group entry added
>> - group entry exists, but not looked up
>> - group entry looked up, but packets are not outputted
>> or ...
>> which you mean?
>>
>>
>> > and about your topology: It has only 2 switches or 4???
>>
>> Only 2 switches (s1 and s2), which corresponding to "Start" and "End"
>> switches
>> on the image you attached on your previous mail. Also h1 and h2
>> represents hosts
>> which do ping.
>>
>>
>> Thanks,
>> Iwase
>>
>> On 2018年03月26日 21:14, Jose Carlos Ferreira de Melo Junior wrote:
>>
>> Hey Iwase,
>>
>> "*/using the group table with openflow 1.3 with no sucess/*"
>> means
>> that I am using the group table as i said before and it is not
>> working,
>> means that I am using the group specification and it doens't work.
>>
>> and about your topology: It has only 2 switches or 4???
>>
>> i don't know if my code is right or if i am missing something
>> else.
>>
>>
>>
>>
>> 2018-03-25 21:40 GMT-03:00 Iwase Yusuke <iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>:
>>
>>
>> Hi Carlos,
>>
>> For such purpose, OFPGT_SELECT is appropriate, I guess.
>>
>> With the topology;
>>
>> +--------+ +--------+
>> | s1 | | s2 |
>> +----+ | (port 2)---(port 2) | +----+
>> | h1 |---(port 1) | | (port 1)---| h2 |
>> +----+ | (port 3)---(port 3) | +----+
>> | | | |
>> +--------+ +--------+
>>
>>
>> I can install groups and flows entries, then can ping
>> between h1
>> and h2 with the
>> following app.
>>
>>
>> $ git diff
>> diff --git a/ryu/app/simple_switch_13.py
>> b/ryu/app/simple_switch_13.py
>> index 06a5d0e..e1a5c3b 100644
>> --- a/ryu/app/simple_switch_13.py
>> +++ b/ryu/app/simple_switch_13.py
>> @@ -48,6 +48,30 @@ class SimpleSwitch13(app_manager.RyuApp):
>>
>> ofproto.OFPCML_NO_BUFFER)]
>> self.add_flow(datapath, 0, match, actions)
>>
>> + buckets = [
>> + parser.OFPBucket(
>> + 50, ofproto.OFPP_ANY, ofproto.OFPG_ANY,
>> + [parser.OFPActionOutput(2)]),
>> + parser.OFPBucket(
>> + 50, ofproto.OFPP_ANY, ofproto.OFPG_ANY,
>> + [parser.OFPActionOutput(3)]),
>> + ]
>> + mod = parser.OFPGroupMod(
>> + datapath, ofproto.OFPGC_ADD,
>> ofproto.OFPGT_SELECT, 1,
>> buckets)
>> + datapath.send_msg(mod)
>> +
>> + match = parser.OFPMatch(in_port=1)
>> + actions = [parser.OFPActionGroup(1)] # from host
>> to switch
>> + self.add_flow(datapath, 1, match, actions)
>> +
>> + match = parser.OFPMatch(in_port=2)
>> + actions = [parser.OFPActionOutput(1)] # from
>> switch to host
>> + self.add_flow(datapath, 1, match, actions)
>> +
>> + match = parser.OFPMatch(in_port=3)
>> + actions = [parser.OFPActionOutput(1)] # from
>> switch to host
>> + self.add_flow(datapath, 1, match, actions)
>> +
>> def add_flow(self, datapath, priority, match, actions,
>> buffer_id=None):
>> ofproto = datapath.ofproto
>> parser = datapath.ofproto_parser
>>
>>
>> I don't know what "using the group table with openflow 1.3
>> with no
>> sucess"
>> means, but please confirm your group and flow table again.
>>
>> Thanks,
>> Iwase
>>
>>
>> On 2018年03月23日 21:11, Jose Carlos Ferreira de Melo Junior
>> wrote:
>>
>> Hey Iwase,
>>
>>
>> Split means really divide the flow I dont know if would
>> be like
>> a load
>> balancing (I think it is)
>>
>> For example the image below
>>
>>
>>
>>
>> But I dont know if this would be possible using the
>> group table.
>>
>> 2018-03-23 4:04 GMT-03:00 Iwase Yusuke <
>> iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>> <mailto:iwase.yusu...@gmail.com
>>
>> <mailto:iwase.yusu...@gmail.com>
>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>>:
>>
>>
>> Hi Carlos,
>>
>> What does "split flows" exactly mean?
>>
>> > req = parser.OFPGroupMod(datapath, ofp.OFPFC_ADD,
>> ofp.OFPGT_SELECT,
>> > group_id, buckets)
>>
>> If you specify OFPGT_SELECT, switch will execute
>> "one"
>> bucket in
>> the group and
>> not copied like the port mirroring. If you intend
>> to do port
>> mirroring, you need
>> to specify OFPGT_ALL. For other available group
>> types,
>> please refer
>> to the
>> OpenFlow spec and your switch's specification.
>>
>> Thanks,
>> Iwase
>>
>>
>> On 2018年03月21日 04:02, Jose Carlos Ferreira de Melo
>> Junior wrote:
>>
>> Hi there,
>>
>> I know this topic was discussed before but I
>> would
>> like just a
>> simple
>> explanation about it.
>>
>> Because I am using the group table with
>> openflow 1.3
>> with no
>> sucess.
>>
>>
>> My purpose is to split one flow in two flows and
>> forward on
>> port 3 and 4
>> using the group table.
>>
>> My code is as follows:
>>
>>
>> *def group_mod(self, datapath):*
>> * global ofp, _parser_, dp*
>> * port_1 = 4*
>> * queue_1 =
>> _parser_.OFPActionSetQueue(0)*
>> * actions_1 = [queue_1,
>> _parser_.OFPActionOutput(port_1)]*
>> *
>> *
>> *
>> *
>> * port_2 = 3*
>> * queue_2 =
>> _parser_.OFPActionSetQueue(0)*
>> * actions_2 = [queue_2,
>> _parser_.OFPActionOutput(port_2)]*
>> *
>> *
>> * weight_1 = 50*
>> * weight_2 = 50*
>> *
>> *
>> * watch_port = ofproto_v1_3.OFPP_ANY*
>> * watch_group = ofproto_v1_3.OFPQ_ALL*
>> *
>> *
>> * buckets = [*
>> * _parser_.OFPBucket(weight_1,
>> watch_port,
>> watch_group,
>> actions_1),*
>> * _parser_.OFPBucket(weight_2,
>> watch_port,
>> watch_group,
>> actions_2)]*
>> *
>> *
>> * group_id = 50*
>> *
>> *
>> * req = _parser_.OFPGroupMod(datapath,
>> ofp.OFPFC_ADD,
>> ofp.OFPGT_SELECT,*
>> * group_id, buckets)*
>> *
>> *
>> * datapath.send_msg(req)*
>> *
>> *
>> *
>> *
>> *
>> *
>> Hope this is right.
>>
>> Could anyone help me with this issue?
>>
>>
>>
>>
>> -- Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at PoP-PE/RNP
>>
>>
>> ------------------------------
>> ------------------------------------------------
>> Check out the vibrant tech community on one of
>> the
>> world's most
>> engaging tech sites, Slashdot.org!
>> http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net <mailto:Ryu-devel@lists.source
>> forge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>>
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>> <https://lists.sourceforge.ne
>> t/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>>
>>
>>
>>
>>
>> -- Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at PoP-PE/RNP
>>
>>
>> ------------------------------
>> ------------------------------------------------
>> Check out the vibrant tech community on one of the
>> world's most
>> engaging tech sites, Slashdot.org!
>> http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net <mailto:Ryu-devel@lists.source
>> forge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>>
>>
>>
>>
>> -- Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at PoP-PE/RNP
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net <mailto:Ryu-devel@lists.source
>> forge.net>
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>>
>>
>>
>>
>> --
>> Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at PoP-PE/RNP
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>>
>>
--
Best regards,
José Carlos Ferreira
Msc student in Computer Science
System and Network Analyst at PoP-PE/RNP
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel