Hey Iwase,
Good news it's working although I couldn't really divide the flow.
Here's what happened.
The flow went to two ports of the switch but the flow is replicated on the
port 2 and 3.
in that case making the same bandwidth go on the port 2 and 3.
I used both *weight* variable as *0* and *ofp.OFPGT_ALL*
queue_1 = _parser_.OFPActionSetQueue(0)
actions_1 = [queue_1, _parser_.OFPActionOutput(3)]
queue_2 = _parser_.OFPActionSetQueue(0)
actions_2 = [queue_2, _parser_.OFPActionOutput(2)]
* weight_1 = 0*
* weight_2 = 0*
watch_port = ofproto_v1_3.OFPP_ANY
watch_group = ofproto_v1_3.OFPQ_ALL
req = _parser_.OFPGroupMod(datapath, ofp.OFPFC_ADD, *ofp.OFPGT_ALL*,
group_id, buckets)
I would like to divide the flow in a way that in port 2 have 50% of the
band and port 3 also have 50% of the band.
I changed the *weight* value to *50* and used *ofp.OFPGT_SELECT* but it
didn't work
2018-04-01 23:09 GMT-03:00 Iwase Yusuke <iwase.yusu...@gmail.com>:
> Hi Carlos,
>
> > *match = _parser_.OFPMatch(ipv4_src="192.168.2.2",
> ipv4_dst="192.168.1.1")*
>
> This rule does not follow "7.2.3.6 Flow Match Field Prerequisite" in the
> OpenFlow Spec 1.3.5, I guess. See the OpenFlow Spec for more details.
> Then, please confirm your flow entries are installed on your switch like
> "ovs-ofctl dump-flows s1".
>
> Thanks,
> Iwase
>
>
> On 2018年04月02日 10:36, Jose Carlos Ferreira de Melo Junior wrote:
>
>> Hey Iwase,
>>
>> Right now my code looks like this OFPActionGroup is in Red
>>
>> *port_1 = 3*
>> * queue_1 = _parser_.OFPActionSetQueue(0)*
>> * actions_1 = [queue_1, _parser_.OFPActionOutput(4)]*
>> *
>> *
>> *
>> *
>> * port_2 = 2*
>> * queue_2 = _parser_.OFPActionSetQueue(0)*
>> * actions_2 = [queue_2, _parser_.OFPActionOutput(2)]*
>> *
>> *
>> * weight_1 = 50*
>> * weight_2 = 50*
>> * watch_port = ofproto_v1_3.OFPP_ANY*
>> * watch_group = ofproto_v1_3.OFPQ_ALL*
>> *
>> *
>> * buckets = [*
>> * _parser_.OFPBucket(weight_1, watch_port, watch_group,
>> actions_1),*
>> * _parser_.OFPBucket(weight_2, watch_port, watch_group,
>> actions_2)]*
>> *
>> *
>> *group_id = 1*
>> *
>> *
>> * req = _parser_.OFPGroupMod(datapath, ofp.OFPFC_ADD,
>> ofp.OFPGT_SELECT,*
>> * group_id, buckets)*
>>
>> * datapath.send_msg(req)*
>>
>> *match = _parser_.OFPMatch(ipv4_src="192.168.2.2",
>> ipv4_dst="192.168.1.1")*
>> *actions = [datapath.ofproto_parser.OFPActionGroup(1)]*
>> * inst = [_parser_.OFPInstructionActions(ofp.OFPIT_APPLY_ACTIONS,
>> actions)]*
>> * mod = datapath.ofproto_parser.OFPFlowMod(datapath, match=match,
>> cookie=0, command=ofp.OFPFC_ADD, idle_timeout=0, hard_timeout=0,
>> priority=3, instructions=inst)*
>> *
>> *
>> * datapath.send_msg(mod)*
>>
>>
>> i was following the code in http://csie.nqu.edu.tw/smallko
>> /sdn/ryu_multipath_13.htm
>>
>> is it right ?
>>
>>
>>
>>
>>
>> thanks
>>
>>
>>
>> 2018-04-01 22:14 GMT-03:00 Iwase Yusuke <iwase.yusu...@gmail.com <mailto:
>> iwase.yusu...@gmail.com>>:
>>
>> Hi Carlos,
>>
>> Hmmmm... have you installed any "flow" entry which contained
>> OFPActionGroup?
>> Also, in your code, you uses "group_id = 50" in OFPGroupMod message.
>> Is
>> OFPActionGroup using the same "group_id = 50"?
>>
>> Thanks,
>> Iwase
>>
>>
>> On 2018年04月02日 09:36, Jose Carlos Ferreira de Melo Junior wrote:
>>
>> Hi Iwase,
>>
>> Sorry for the late answer
>>
>> well... I checked the group stats as you said and it's not being
>> looked up
>>
>> *ovs-ofctl dump-group-stats -O OpenFlow s2*
>> *OFPST_GROUP reply (OF1.3) (xid=0x2):*
>> *group_id=1,duration=12.837s,ref_count=0,packet_count=0,byte
>> _count=0,bucket0:packet_count=0,byte_count=0,byte_count=0,
>> bucket1:packet_count=0,byte_count=0*
>> *
>> *
>> I'm really lost and don't know how to fix that
>>
>> Do you have any idea of how can I solve this problem?
>>
>>
>> many thanks.
>>
>> 2018-03-29 1:33 GMT-03:00 Iwase Yusuke <iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>:
>>
>> Hi Carlos,
>>
>> The group entries are looked up (or specified) by
>> OFPActionGroup in
>> flow
>> entries.
>>
>> If looked up, ref_count, packet_count and byte_count should
>> be
>> incremented.
>>
>> mininet> sh ovs-ofctl dump-group-stats s1 -O OpenFlow13
>> OFPST_GROUP reply (OF1.3) (xid=0x4):
>> group_id=1,duration=45.105s,re
>> f_count=1,packet_count=5,byte_count=378,bucket0:packet_count
>> =4,byte_count=336,bucket1:packet_count=1,byte_count=42
>>
>> Thanks,
>> Iwase
>>
>>
>> On 2018年03月27日 23:10, Jose Carlos Ferreira de Melo Junior
>> wrote:
>>
>> Hi Iwase,
>>
>> The group entry is added...
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> but I don't understand how can be looked up.
>> I don't know how to do this
>>
>>
>> Is there any other thing that I am missing ????
>>
>>
>> thanks in advanced
>>
>>
>>
>>
>>
>>
>>
>> 2018-03-26 20:28 GMT-03:00 Iwase Yusuke
>> <iwase.yusu...@gmail.com <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>>:
>>
>> Hi Carlos,
>>
>> > "*/using the group table with openflow 1.3 with
>> no
>> sucess/*"
>> means that I am
>> > using the group table as i said before and it is
>> not
>> working,
>> means that I am
>> > using the group specification and it doens't work.
>>
>> "Does not work" means
>> - no group entry added
>> - group entry exists, but not looked up
>> - group entry looked up, but packets are not
>> outputted
>> or ...
>> which you mean?
>>
>>
>> > and about your topology: It has only 2 switches
>> or 4???
>>
>> Only 2 switches (s1 and s2), which corresponding to
>> "Start" and
>> "End" switches
>> on the image you attached on your previous mail.
>> Also h1
>> and h2
>> represents hosts
>> which do ping.
>>
>>
>> Thanks,
>> Iwase
>>
>> On 2018年03月26日 21:14, Jose Carlos Ferreira de Melo
>> Junior wrote:
>>
>> Hey Iwase,
>>
>> "*/using the group table with openflow 1.3
>> with no
>> sucess/*"
>> means
>> that I am using the group table as i said
>> before and
>> it is not
>> working,
>> means that I am using the group specification
>> and it
>> doens't work.
>>
>> and about your topology: It has only 2 switches
>> or 4???
>>
>> i don't know if my code is right or if i am
>> missing
>> something else.
>>
>>
>>
>>
>> 2018-03-25 21:40 GMT-03:00 Iwase Yusuke
>> <iwase.yusu...@gmail.com <mailto:iwase.yusu...@gmail.com
>> >
>> <mailto:iwase.yusu...@gmail.com <mailto:iwase.yusu...@gmail.com>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>> <mailto:iwase.yusu...@gmail.co
>> m
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com <mailto:
>> iwase.yusu...@gmail.com>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>>>:
>>
>>
>> Hi Carlos,
>>
>> For such purpose, OFPGT_SELECT is
>> appropriate, I
>> guess.
>>
>> With the topology;
>>
>> +--------+
>> +--------+
>> | s1 | |
>> s2 |
>> +----+ | (port 2)---(port 2)
>> | +----+
>> | h1 |---(port 1) | |
>> (port
>> 1)---| h2 |
>> +----+ | (port 3)---(port 3)
>> | +----+
>> | | |
>> |
>> +--------+
>> +--------+
>>
>>
>> I can install groups and flows entries,
>> then can ping
>> between h1
>> and h2 with the
>> following app.
>>
>>
>> $ git diff
>> diff --git a/ryu/app/simple_switch_13.py
>> b/ryu/app/simple_switch_13.py
>> index 06a5d0e..e1a5c3b 100644
>> --- a/ryu/app/simple_switch_13.py
>> +++ b/ryu/app/simple_switch_13.py
>> @@ -48,6 +48,30 @@ class
>> SimpleSwitch13(app_manager.RyuApp):
>>
>> ofproto.OFPCML_NO_BUFFER)]
>> self.add_flow(datapath, 0,
>> match, actions)
>>
>> + buckets = [
>> + parser.OFPBucket(
>> + 50, ofproto.OFPP_ANY,
>> ofproto.OFPG_ANY,
>> +
>> [parser.OFPActionOutput(2)]),
>> + parser.OFPBucket(
>> + 50, ofproto.OFPP_ANY,
>> ofproto.OFPG_ANY,
>> +
>> [parser.OFPActionOutput(3)]),
>> + ]
>> + mod = parser.OFPGroupMod(
>> + datapath, ofproto.OFPGC_ADD,
>> ofproto.OFPGT_SELECT, 1,
>> buckets)
>> + datapath.send_msg(mod)
>> +
>> + match = parser.OFPMatch(in_port=1)
>> + actions =
>> [parser.OFPActionGroup(1)] #
>> from host
>> to switch
>> + self.add_flow(datapath, 1, match,
>> actions)
>> +
>> + match = parser.OFPMatch(in_port=2)
>> + actions =
>> [parser.OFPActionOutput(1)] #
>> from
>> switch to host
>> + self.add_flow(datapath, 1, match,
>> actions)
>> +
>> + match = parser.OFPMatch(in_port=3)
>> + actions =
>> [parser.OFPActionOutput(1)] #
>> from
>> switch to host
>> + self.add_flow(datapath, 1, match,
>> actions)
>> +
>> def add_flow(self, datapath,
>> priority,
>> match, actions,
>> buffer_id=None):
>> ofproto = datapath.ofproto
>> parser = datapath.ofproto_parser
>>
>>
>> I don't know what "using the group table
>> with
>> openflow 1.3
>> with no
>> sucess"
>> means, but please confirm your group and
>> flow
>> table again.
>>
>> Thanks,
>> Iwase
>>
>>
>> On 2018年03月23日 21:11, Jose Carlos Ferreira
>> de Melo
>> Junior wrote:
>>
>> Hey Iwase,
>>
>>
>> Split means really divide the flow I
>> dont know if
>> would be like
>> a load
>> balancing (I think it is)
>>
>> For example the image below
>>
>>
>>
>>
>> But I dont know if this would be
>> possible
>> using the
>> group table.
>>
>> 2018-03-23 4:04 GMT-03:00 Iwase Yusuke
>> <iwase.yusu...@gmail.com <mailto:iwase.yusu...@gmail.com
>> >
>> <mailto:iwase.yusu...@gmail.com <mailto:iwase.yusu...@gmail.com>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com <mailto:
>> iwase.yusu...@gmail.com>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>> <mailto:
>> iwase.yusu...@gmail.com
>>
>> <mailto:iwase.yusu...@gmail.com>
>>
>> <mailto:iwase.yusu...@gmail.com <mailto:
>> iwase.yusu...@gmail.com>>
>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>
>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com <mailto:
>> iwase.yusu...@gmail.com>>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>
>> <mailto:iwase.yusu...@gmail.com
>> <mailto:iwase.yusu...@gmail.com>>>>>>:
>>
>>
>> Hi Carlos,
>>
>> What does "split flows" exactly
>> mean?
>>
>> > req =
>> parser.OFPGroupMod(datapath,
>> ofp.OFPFC_ADD,
>> ofp.OFPGT_SELECT,
>> >
>> group_id,
>> buckets)
>>
>> If you specify OFPGT_SELECT,
>> switch will
>> execute
>> "one"
>> bucket in
>> the group and
>> not copied like the port
>> mirroring. If
>> you intend
>> to do port
>> mirroring, you need
>> to specify OFPGT_ALL. For other
>> available group
>> types,
>> please refer
>> to the
>> OpenFlow spec and your switch's
>> specification.
>>
>> Thanks,
>> Iwase
>>
>>
>> On 2018年03月21日 04:02, Jose Carlos
>> Ferreira de Melo
>> Junior wrote:
>>
>> Hi there,
>>
>> I know this topic was
>> discussed
>> before but I
>> would
>> like just a
>> simple
>> explanation about it.
>>
>> Because I am using the group
>> table with
>> openflow 1.3
>> with no
>> sucess.
>>
>>
>> My purpose is to split one
>> flow in
>> two flows and
>> forward on
>> port 3 and 4
>> using the group table.
>>
>> My code is as follows:
>>
>>
>> *def group_mod(self,
>> datapath):*
>> * global ofp,
>> _parser_, dp*
>> * port_1 = 4*
>> * queue_1 =
>> _parser_.OFPActionSetQueue(0)*
>> * actions_1 = [queue_1,
>> _parser_.OFPActionOutput(port_1)]*
>> *
>> *
>> *
>> *
>> * port_2 = 3*
>> * queue_2 =
>> _parser_.OFPActionSetQueue(0)*
>> * actions_2 = [queue_2,
>> _parser_.OFPActionOutput(port_2)]*
>> *
>> *
>> * weight_1 = 50*
>> * weight_2 = 50*
>> *
>> *
>> * watch_port =
>> ofproto_v1_3.OFPP_ANY*
>> * watch_group =
>> ofproto_v1_3.OFPQ_ALL*
>> *
>> *
>> * buckets = [*
>> *
>> _parser_.OFPBucket(weight_1,
>> watch_port,
>> watch_group,
>> actions_1),*
>> *
>> _parser_.OFPBucket(weight_2,
>> watch_port,
>> watch_group,
>> actions_2)]*
>> *
>> *
>> * group_id = 50*
>> *
>> *
>> * req =
>> _parser_.OFPGroupMod(datapath,
>> ofp.OFPFC_ADD,
>> ofp.OFPGT_SELECT,*
>> * group_id,
>> buckets)*
>> *
>> *
>> *
>> datapath.send_msg(req)*
>> *
>> *
>> *
>> *
>> *
>> *
>> Hope this is right.
>>
>> Could anyone help me with
>> this issue?
>>
>>
>>
>>
>> -- Best regards,
>> José Carlos Ferreira
>> Msc student in Computer
>> Science
>> System and Network Analyst at
>> PoP-PE/RNP
>>
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech
>> community
>> on one
>> of the
>> world's most
>> engaging tech sites,
>> Slashdot.org!
>> http://sdm.link/slashdot
>>
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net <mailto:Ryu-devel@lists.source
>> forge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>>>
>> <mailto:Ryu-devel@lists.source
>> forge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>>
>>
>> <mailto:Ryu-devel@lists.source
>> forge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>>>>
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>> <https://lists.sourceforge.ne
>> t/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>>
>> <
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>> <https://lists.sourceforge.ne
>> t/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>>>
>> <
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>> <https://lists.sourceforge.ne
>> t/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>>
>> <
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>> <https://lists.sourceforge.ne
>> t/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>>>>
>>
>>
>>
>>
>> -- Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at
>> PoP-PE/RNP
>>
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community
>> on one
>> of the
>> world's most
>> engaging tech sites, Slashdot.org!
>> http://sdm.link/slashdot
>>
>>
>>
>> ______________________________
>> _________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net <mailto:Ryu-devel@lists.source
>> forge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>>>
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>> <https://lists.sourceforge.ne
>> t/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>>
>> <
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>> <https://lists.sourceforge.ne
>> t/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>>>
>>
>>
>>
>>
>> -- Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at PoP-PE/RNP
>>
>>
>> ------------------------------
>> ------------------------------------------------
>> Check out the vibrant tech community on one of
>> the
>> world's most
>> engaging tech sites, Slashdot.org!
>> http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net <mailto:Ryu-devel@lists.source
>> forge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>>
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>> <https://lists.sourceforge.ne
>> t/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>>
>>
>>
>>
>>
>> -- Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at PoP-PE/RNP
>>
>>
>> ------------------------------
>> ------------------------------------------------
>> Check out the vibrant tech community on one of the
>> world's most
>> engaging tech sites, Slashdot.org!
>> http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net <mailto:Ryu-devel@lists.source
>> forge.net>
>> <mailto:Ryu-devel@lists.sourceforge.net
>> <mailto:Ryu-devel@lists.sourceforge.net>>
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>>
>>
>>
>>
>>
>> -- Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at PoP-PE/RNP
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net <mailto:Ryu-devel@lists.source
>> forge.net>
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>> <https://lists.sourceforge.net/lists/listinfo/ryu-devel>
>>
>>
>>
>>
>> --
>> Best regards,
>> José Carlos Ferreira
>> Msc student in Computer Science
>> System and Network Analyst at PoP-PE/RNP
>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>
>>
>>
>> _______________________________________________
>> Ryu-devel mailing list
>> Ryu-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>>
>>
--
Best regards,
José Carlos Ferreira
Msc student in Computer Science
System and Network Analyst at PoP-PE/RNP
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel
