I'm afraid to find out loops working with VLANs, but I'll try it.

Best regards!

Em ter, 2 de out de 2018 às 13:13, Soe Ye Htet <soeyehtet1...@gmail.com>
escreveu:

> Hi,
>
> I think it is possible to redirect a in-band communication but it may
> depends on the configuration of in-band communication in your network. If
> your network interface can support vlan, you can configure two separate
> vlans for control channel and data channel for eg. vlan1 is for control
> plane and vlan2 is for data plane. Then you can configure the necessary
> openflow rules between switch and controller for rerouting process if a
> link is congested.
>
> Best Regards,
>
> Soe Ye Htet
> Master Engineering Student
> Wireless Network and Future Internet Research Group
> Chulalongkorn University, Thailand
> On 26 Sep 2561 13:34 +0700, Wilson José Siqueira <
> wilson.sique...@uniriotec.br>, wrote:
>
> Good morning, all.
>
> Is it possible to redirect a in-band communication switch-controller to
> another port (or link) in case of a traffic congestion or another kind of
> problems, like errors or delay into OpenFlow Channel?
>
> I saw in 6.3.1 Connection Setup, OpenFlow Switch Specification, Version
> 1.3.0 (Wire Protocol 0x04) that:
>
> "Traffic to and from the OpenFlow channel is not run through the OpenFlow
> pipeline."
>
> So how can I perform this change in OpenFlow Channel?
> Is it possible with another OpenFlow version?
>
> Thanks in advance!
>
>
>
> *Wilson José Siqueira*
>
> *Mestrando*
>
> *UNIRIO - CCET*
>
> *Tel1: (21) 3037-3989*
>
> *Tel2: (21) 2238-3803*
>
> *Cel2: (21) 98636-0467*
> _______________________________________________
> Ryu-devel mailing list
> Ryu-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>
> _______________________________________________
> Ryu-devel mailing list
> Ryu-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ryu-devel
>


-- 

*Wilson José Siqueira*

*Mestrando*

*UNIRIO - CCET*

*Tel1: (21) 3037-3989*

*Tel2: (21) 2238-3803*

*Cel2: (21) 98636-0467*
_______________________________________________
Ryu-devel mailing list
Ryu-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ryu-devel

Reply via email to