Hi: thanks to all who offered bolsters or ideas on how to make them. I may yet take you up on those offers. a couple of years ago a kind soul on this list sent me some of the narrow NE wood bolsters (1 foot by 9.5 feet in S scale) and I have managed to use up most of them in worthwhile projects. The ones from the QC alldoor boxcar kit are 2 scale feet wide. after I wrote my original message, I found a couple of pairs of metal bolsters of different styles that I had put carefully away. both are about 18 scale inches wide. Of them all I think the QC ones looked best for the modern cars I am interested in building including the centrebeam flatcar that Ernie Horr wrote up some years ago in the S Gaugian I believe. Anyway if QC is just a memory I guess I don't infringe on any patent laws by making resin copies of the bolsters for my own use. First I have to learn how to make resin copies. but then I will need to do that to make copies of the upright beam that runs along the centre of the car. thanks again all
The poll results are in....... To REPLY to the list, use REPLY ALL, to reply to the sender, use REPLY. I do NOT know if this works on all e-mail software, but it works on some of the most common ones. For those of you on DIGEST mode, all REPLY messages go to the list. Change your membership, change your message settings, use our CALENDAR, view shared files or photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
