Dear Roger,
Which SHS diesel? They are not all the same. If it is the green
MEC SW-9 wait for the updated pcb correct for the NMRA standard DCC
socket. You can replace this by soldering 6 wires. If it is the F3,
remember the bulbs are 5 volts and you will need limiting resistors (but
not on the B unit). If it is the F7, I think that the limiting
resisitors are on the pcb, but I am not 100% sure. We still have the F7
DCC sound units. They work just fine. These are the only diesels from
SHS that come with speakers.
Best regards,
Don
Ironhorse wrote:
>I purchased a Showcase Diesel a couple of weeks ago. I am very pleased
>with quality.
>It looks great and runs smooth.
>
>I am using a NCE Procab DCC for power.
>The loco has a circuit board under the speaker. I imagine this is just
>for sound only.
>
>I would like to wire in a DCC decoder by Lenz.
>
>How I could bypass the circuit board completly and it would work
>I would like to know if I could use the sound board with my decoder.
>
>If so I need to know how to change the wiring.
>
>Comments ?
>
>Roger
>
>
>
The poll results are in....... To REPLY to the list, use REPLY ALL, to reply
to the sender, use REPLY. I do NOT know if this works on all e-mail software,
but it works on some of the most common ones. For those of you on DIGEST mode,
all REPLY messages go to the list.
Change your membership, change your message settings, use our CALENDAR, view
shared files or photos, view the list archives, GO TO
http://groups.yahoo.com/group/S-Scale/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
