----- Original Message -----
From: "ken garber" <[EMAIL PROTECTED]>
> What plastic is the AM wood caboose roof made out of and what cement will
> work on it. Tenax does not work on it. My next step is to try ACC.
> ken
KEN:
Dunno about the material used for the AM roof. Thought Tenax would affix
just about anything plastic. Oh, well, if you want to avoid using CA--mess
that it usually is--trundle off to you local millinary store, and buy a tube
of liquid velcro. Squeeze a blob out onto a piece of cardboard or paper and
apply to the edge with a toothpick. This stuff can be diluted with MEK if
you find it too viscous for your application. Be absolutely certain you have
the roof exactly where you want it. Liquid velcro is somewhat unforgiving
after a few seconds. Or, again avoiding CA, get some 5-min. epoxy at you
local Ace Hdwr. Mix up a bit, and use that for adhesion. There's more than
one way to glue a roof.
Gerry Evans
In Flagstaff
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
