> Date: Sun Jun 4, 2006 1:18 pm (PDT)
> From: "Samuel J. McCoy" [EMAIL PROTECTED]
>
>The NCE P2KSR is a plug in decoder designed for Life Like Proto 2000 engines
>and just happens to work in S Helper engines. It plugs in backwards so you
>have to correct this in CV29 by adding a one to the value. No wires or
>soldering.
Last month I ordered the NCE P2KSR decoder for my SW-1 at my local
hobby shop, picked it up yesterday, Sunday, and installed it. As Bill
Lane stated, it took me longer to take off and reinstall the shell
than to install the decoder. It's nice not to have to mess with all
those wires!
I also ordered the similar Digitrax DH163IP, which has yet to arrive.
It appears the Digitrax decoder may not have installed so easily in
the SW-1, because, as Sam McCoy later warned, it would have
interfered with the lighting springs. If and when it arrives, I'll
see what other locomotive I can use it in.
It's great to have SP 1014 back in service!
--
Bill Roberts
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
