You can "swing" the coupler box by using a center screw only mounting and a centering spring of some sort to center 802 box. I have seen a strip of rubber band , or thin dia. length of piano wire, or light coil spring attached to back of Coupler draft gear box with other end attached to car body centerline.
Another aproach is the "Traction" style coupler mounting....Mount 802 box to a strip of brass/plastic, length to fit car spacing of truck (about 1-2"), mounted to bottom of floor in front of truck bolster. this would allow coupler to swing in a radius from side to side. Limitations are underframe details and design and end steps. This may also require some method of spring centering. Dr. K. Loeb (Peter) ----- Original Message ----- From: richgajnak To: [email protected] Sent: Tuesday, December 05, 2006 5:48 PM Subject: {S-Scale List} Re: NASG/AM Heavyweight Operation [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
