--- In [email protected], "John Gibson" <[EMAIL PROTECTED]> wrote:
>
> --- In [email protected], "ed_loizeaux" <Loizeaux@> wrote:
> >
> > Wally...TOMAR sells exactly what you need. Click here:
> > http://www.tomarindustries.com/acc.htm Check out product #801.
Just
> > follow the directions. NEVER wire 1-1/2 volt bulbs directy to
the
> > track. The magic smoke will come out and then they will not work
> > anymore. Good luck....Ed L.
> >
> =================================================================
>
> OR, for less than $2.00 in parts at a electronics surplus house,
you
> can build your own constant 12V power circuit.
>
> Go here: <http://www.wiringfordcc.com/gorhlite.htm> and page down
to
> Recommendation 12-4.
>
> Just installed one of these units in my Gold Coast Brass caboose to
run
> the 1.5V bulbs in the marker lights and ran it for a couple of
hundred
> S scale miles on Arden's layout last weekend. Worked like a charm
with
> nary a flicker.
>
> Cheers,
>
> John Gibson
> Rocklin, CA
======================================================================
Opps! I did not completely answer the question.
For the resistors, I used a 360ohm resistor for each bulb from the
constant lighting unit.
~ John
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
