Folks, Nobody has mentioned the Greenbriar GP_30's and many of the BTS parts that are in them. BTS should have EMD and ALCO truck sideframes that work on the 'older' American Models engines. Those brass side frames certainly improve the appearance of AM's engines. (Just a little plug for you Billy W.)
Bob Werre ctxmf74 wrote: > --- In [email protected] <mailto:S-Scale%40yahoogroups.com>, > "maxxi4x" <[EMAIL PROTECTED]> wrote: > > > > Hello , > > I am still modeling in O but have some heavy thoughts about switching > > to S. Lack of space is one reason. Now I am looking around and have a > > questions - is there anywhere a source for standard gauge diesel > > trucks , prefer brass ? And where can I find some brass diesels like > > GP9/38? > > Hi Roland, The selection of modern era S scale diesels is pretty > sparse. SHS makes a sweet running and well detailed switcher, American > models makes a good running GP9, GP35 and SD60, they all need some > detail work but are good starting points. The brass that I recall > seeing is an Alco rs11, EMD SD50, SD60, GP38-2 and SD9. I'm sure some > of the longtime S scalers on here can tell you of some others. The > > Regards, Dave Branum > > [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
