Thanks Bill,
I happen to have two such cars on my to do list.
Ed Koz
Scale S Only <[EMAIL PROTECTED]> wrote:
Hi ALL --
OK, I will twll you what I did..,
I mounted Kadee 802/808's by drilling two pilot holes sized for the standard
Kadee mounting screws using the coupler box as a guide. I put the coupler box
upper lip tight against the car end sill when doing this. The two holes were
for the center / foreward hole and the rear hole of the coupler box. I used the
Kadee short mounting screws to put it all together. NO painting or fitting or
other shenanigans required. I regularly run these cars in 30+ car trains on 2%
grades without any trouble.
EASY!
Bill Winans
Prescott Valley, AZ
----- Original Message -----
From: Tom Hawley
To: [email protected]
Sent: Saturday, February 09, 2008 9:55 AM
Subject: Re: {S-Scale List} Re: Mounting Couplers on S Scale America Tank Cars
----- Original Message -----
From: John Gibson
My thanks to the several folks who replied to my message. I appreciate the
help. My tank car fleet will soon be rolling!
> > > > > > > >
Wonderful.
Now I would like to know how to install scale couplers on DPH/SSA tank cars.
Tom Hawley
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
