I might suggest checking the motor itself. I have 4 switchers, one unit
stopped just like your's. I popped the hood and replaced the decoder
and it ran fine for awhile. After fooling with this problem for awhile,
I just gave the flywheel a little twist and the little guy took off. A
few minutes later it stalled again. Don sent me a new motor and
everything has been fine.
Bob Werre
BobWphoto.com
Larry Langford wrote:
> Are you sure you don't have it MU'ed to another unit? I sometimes
> forget to
> de-consist and have a real puzzle until I figure out what locomotive is
> really controlling the non-responding unit.
>
> L
>
>
> Hi All,
>
> I need some help or advice. My SW-1 ran fine until about a month ago. It
> stopped responding suddenly and doesn't respond to any commands. I
> tried to
> reprogram the decoder and the response in my DT100 read "good". However,
> the loco won't budge and the lights don't work. It's as if it isn't
> getting
> any power. All other locos run fine. Any suggestions or help will be
> greatly
> appreciated.
>
> Ed Davis
> Stockton, Ca
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
