Plastruct HO rough brick sheet, part #91605, has 22 courses per inch, which I figure scales to 2.9 inches per course in S. The bricks in front of my house are 2.5 inches tall, so with a .4 inch mortar in place of the normal .5 inch, it is good for S. The Plastruct bricks look slightly rounded to me, so if you need them to be flat with sharp edges, you probably should have some laser cut. Better yet, have a pattern laser cut, and then cast them for the rest of us.
-Michael Eldridge -San Jose, CA --- In [email protected], "ed_loizeaux" <loize...@...> wrote: > > > > > I'd like to > > > > know if there is a manufacturer of S-scale brick patterned styrene > > > > sheets for scratchbuilding? > > > > --Larry > > From an old archived message: > > Plastruct has styrene brick sheet that > they list as HO/1:100. Not! Buy some, and get your calipers out. You > will > find the bricks are almost perfectly 1:64. ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[email protected] mailto:[email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
