Have stripped a group of AF plastic ribbed passenger cars. After stripping the
cars ( Stripper did not seem to have an affect on the glue holding the window
glass- used oven cleaner ), I used hot water to help release the windows. It
seemed to help. Have used X type hobby blades to remove glued areas. Very hard
at times.
Question is has anyone done this and is there a remover of some type that would
work on the glue. The main problem is glue that is up in the top flange that
holds the window material, and the door window area is very tight to work in. A
lot of these cars sombody had tried to repaint and gave up on, etc, and may or
did have windows replaced and glued with super glue or you name it.
Any ideas on a glue
removers that will not hurt the plastic. Also will super glue remover damage
the plastic. Also has anyone an idea for a SS paint that looks good. Don't know
yet they will be painted SS, but one of the repainted stripped cars had a paint
that looked very good ( Never liked the mirror finish on the old AF and the new
cars out there).
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
