Hi All,
With all of the talk on working with brass, I have a question. The cab on
my OMI
SW1500 brass switcher came apart from the hood while I was installing a sound
system. Can the two pieces be joined together using a soldering iron? I don't
have a resistance soldering system or a torch. Too expensive right now. The two
pieces will fit together easily because they came apart at the old solder
joint.
I've tried to solder some brass before with little or no success. Any advice
will be appreciated.
Ed Davis
Stockton
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
