John, I’m using Kappler wood ties with Tomalco track, #KP066. They are a very close match. I’m not using Fastracks, but it sounds like you have a little sanding to do.
Roger Nulton From: vito4cal Sent: Monday, February 21, 2011 9:12 AM To: [email protected] Subject: {S-Scale List} Shims for Fastrack Switches & ties for Tomalco Track Greetings: A question for you folks who are using Fastrack Switches & their Quick Sticks ties and Tomalco Track. As you may have noticed, the rail height on the switches when mounted on their Quick Sticks ties are about 1/8" heigher than the rail height on the Tomalco Track. I was wondering how you folks are handling the situation. Seems I could sand down the Quick Sticks ties, place shims (plastic or wood under the Tomalco track, or do nothing and let the ballast fill under the track. Second question - I have tieless gaps (rail only) between the switches and flex track pieces and not enough left over plastic ties to fill the area. Are there matching ties (wood, plastic, etc) made to work with the Tomalco flex track? FYI, I am using Code 100 non-weathered track and building No. 6 switches. Thank you for your assistance. John Gibson Rocklin, CA [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
