Depends on what you want. I put a photo in my album http://groups.yahoo.com/group/S-Scale/photos/album/242646530/pic/1313042582/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc
One thing not apparent in the picture is that the LED's are behind the white paper, so the dot looks more diffused in person. There is a break in the black line over the spot where the LED lives. -Michael Eldridge --- In [email protected], "ardeng" <726arden@...> wrote: > > If it is a bi-colored LED, wouldn't just one be required? > ------------------------- > > --- In [email protected], "Michael" <meldridge@> wrote: > > > > I have this on my panels. If you use low current switch motors (Tortoise, > > SwitchMaster) it is just a matter of putting two bi-color LED's and a > > resistor (or two) in parallel with the wires going to the switch motor, > > with the LED's oriented in opposite directions. There are other ways to do > > this with auxiliary contacts, or with LED's in series with the motor, but > > this way keeps the wiring next to the switch, with only two wires going > > from the panel to the motor, and gives you control over the brightness of > > the LED's. > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
