Hi Donald; While I haven't used them yet, I've heard good things about the high bass speakers.
OTOH, a lot of people have noted that they get better results pointing the speakers of whatever type DOWN toward the tracks, firing through the truck mounting holes or openings in fuel tank bottom or tender/ash pan bottom. It seems that the sound waves bouncing off a block enhances the base values. Those in doubt can test by holding a hand close above the upward pointing speaker output. If the result doesn't sound better to you, then don't bother to change the mounting to point down. Most AM diesels don't provide a plug for the decoder. While I hard-wired mine, adding an after-market plug will be easier if you need to change out the decoder for any reason later. Finally, get some warm-white LEDs and resistors to replace the single AM bulb (or blueish "white" LED). The longer life span and improved color are both worth the effort. Pieter E. Roos --- On Tue, 7/5/11, Bill Lane <[email protected]> wrote: > Donald, > > > > I am a fan up speakers pointing straight up through fan > grills or the stack. > Others opinions will vary. I am using the deep bas speakers > exclusively. > http://railmasterhobbies.com/Speakers.htm > > > > > > > > > Thank You, > Bill Lane ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
