To me it's much simpler to just make the templates and be done with it. It's really not all that hard to line them up, and certainly much easier to use if you are trying to locate a curve to join two tangent tracks. Set the template a little inside and then use the bent stick to make a gentle transition at each end.
Charles Weston --- On Sun, 8/28/11, ctxmf74 <[email protected]> wrote: From: ctxmf74 <[email protected]> Subject: {S-Scale List} Re: "Pine Strip" turns To: [email protected] Date: Sunday, August 28, 2011, 2:15 PM --- In [email protected], Charles Weston <rotary-oy@...> wrote: > Using a tape measure is not a very good idea --Â try to mark a 54 or 60 inch > radius curve with a tape. Hi Charles, Anyone who's worked in construction has no problem with using a tape to swing curves. Just drive a nail at the radius point then hook the tape on it( the common pocket tapes even have a little nailhead notch on them) then hold your pencil against the tape at the desired radius and swing away. For layouts where the radius point falls in an isle I just clamp or screw a temporary board across the isle then drive the radius nail into it. If the center falls inside a wall or other inaccessible place I'll make a template from scrap sheet material or even cardboard by swinging the arc on the template material then sawing it to the curve. If using a template some care must be taken to make sure the centerline falls on the correct alignment and that it is squared up with the tangent tracks coming and going.Templates placed end to end without proper alignment can create unfair curves with unwanted angle points.....Dave Branum [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
