Mr. Werre,
HUH?? This post is regarding a Speeder?? Where? How?
>Bob, you are correct in every way. I have four control
>panels, three of which were built during my DC daze.
>When I switched to Dynatrol all I did was add their
>power supplies to my rotary switches. When I started
>my DCC system, I pretty much did the same thing by
>just switching out wires. It's worked fairly well
>although several of the DCC accessories might
>have some conflicts.
>All this has worked fairly well until I did recently
>made some changes in the housekeeping department of
>my main control panel, under the layout cabling and
>at the same time moving my DCC system. This has
>resulted in a very frustrating time for me. What I
>thought would take a couple of hours, now has taken
>me two weeks of spare time. My main control panel's
>wiring resembled a drain clog! My whole system has
>been thrown into a mostly non-functioning static
>layout. However, I'm on the downward slope of that
>hill--so I hope to up and running again this weekend.
>Actually it has to work as I have open house for
>National Model Railroad Month in a couple of weeks.
>Bob Werre
>PhotoTraxx
Gentlemen...please, PLEASE, address your post to the
subject of which you are speaking. If you are changing
the subject PLEASE type the 'new' subject in the subject
line. It's a 'very simple' thing to do. This way, we
will all be able to identify each post by it's subject
to know if it is something we need to read, or pass it
up and move on.
Thanks so much,
Don McGinnis
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
