Jim, Thank you for the suggestion. I will give it some thought.
David --- In [email protected], Jim Guthrie <jim@...> wrote: > > On Mon, 31 Oct 2011 01:42:09 -0000, you wrote: > > David, > > >Thank you for the suggestions. Eileens Emporium has a very nice selection of > >nickel silver. > > Another way of getting nickel silver strip to your particular > requirements is to etch it from sheet of the required gauge. There > are obviously setup costs for going down this road and your > requirements might be at a level that make the unit cost very high. > But if you can find an etcher whose costs are reasonable, that might > be a way round your problem. The CAD work for the photo tool for > etching is very straightforward. > > Jim. > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
