Cuts sb about 3/4 the way into the strip. At 40" Radius the spacing can be 1/2 to 3/4" apart. The cut edge is always to the inside of the curve. Paul
________________________________ From: David Engle <[email protected]> To: S-Scale Group <[email protected]> Sent: Sunday, March 18, 2012 11:53 AM Subject: {S-Scale List} Homosote Board I have a quantity of 7/16" Homosote board that I would like to saw up into strips 3 in. wide for roadbed in yard area, vs. mainline setting. Some will be straight, some will go on curves no less than 40" radius. How deep into the board width should the lateral cuts be, and what spacing between the cuts should be best? Thanks Much. DJE
