I have created a 3D printed model of a Missouri Car and Foundry (later ACF)
Arch Bar truck, from about 1883. This truck was created with Google SketchUp
and uploaded to Shapeways. I have just ordered the "test shot" to see how well
it will work. I made the truck in three parts with an additional part for the
brake beams, so that it would have flexibility. Hopefully it will equalize
nicely for use in Proto:64, but can also use the code 88 wheels or possibly
code 110 wheels, if the axle length works.
A picture of the assembled truck is placed in the photo section under "D E
Smith projects". It can also be seen for a while under the "New Photos"
section at the top of the home page.
After I receive the "test shot" I will make a report as to my evaluation.
Thank you
Darrell Smith
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
