Bill, OK. I'm not sure just what you are describing. I'm wondering if it isn't a box that protrudes through the roof to provide a flat surface for the ice hatch itself? I don't see a reason why that couldn't be made with 3D printing as well as long as specs. are found.
Darrell --- In [email protected], Bill Rigsby <silvergost1@...> wrote: > > Darrell, >  The hatches themself's may be, however there are two longitudnails that > run from behind the hatches, and from each side to the roofwalk that would > still have to be made. >  Bill > > --- On Thu, 3/22/12, Darrell <darrell.ev.smith@...> wrote: > > > From: Darrell <darrell.ev.smith@...> > Subject: Re: {S-Scale List} Reefer hatches > To: [email protected] > Date: Thursday, March 22, 2012, 11:47 PM > > > >  > > > > Would reefer hatches.... these and other styles.... be a viable candidate for > 3D printing? The price per part would be pretty reasonable. With other styles > you all could modify to your heart's content! > > Darrell Smith > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
