I am starting to work with the "scenery Genie" and am soliciting advice /
practical tips on what to use and how to build a curved, free standing scenery
divider.
I want to put up a 16 to 18 inch high backdrop that will be viewed from both
sides. the divider needs to be curved at about 50 inch radius in two areas,
and is about 20 feet long. I would like it to be thin, as there is no room for
a 2 or 3 inch thick divider. Layout framing is accessible, and is L-girder
type construction.
Modeling magazines mention upson board or sheet styrene as likely candidates.
I have not checked into local availability of the products yet, but was seeking
some thoughts from those who have gone down this path before.
Many thanks in advance,
Terry Dillon
Burbank CA
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
