I have an uncoupler that works with Kadee's without modification to the Kadees and does not use electricty and only uncouples when you want it to. PN UR -3, 9.95 ea and ready to install. My uncouplers do not fail. Paul PVC
________________________________ From: gpnrr <[email protected]> To: [email protected] Sent: Wednesday, April 4, 2012 1:14 PM Subject: {S-Scale List} new uncoupler Friends, I recently needed to replace an uncoupler ramp that had failed. I had been making my own using an idea from local master Gill Freitag. While operating on another friend's layout, I asked him what he was using. He showed me some units he was building and offered to build an S friendly version. Well this past weekend, I proceeded to remove the old unit, which was a chore unto itself. During the initial installation I simply cut a slot with a sabre saw and then widened it with a rotary rasp on a power drill to custom fit the ramp. Of course track and ballast completed the project. In this removal process, I had hoped to pull the unit down so as to not disturb the track--wishful thinking! I had to purchase a multi-tool (which is another complete story I won't go into) that helped enough to where I was finally able to let me remove the unit. I think this is like a doctor removing tonsils through one's nose! Anyway I've now inserted the new unit, but I'm having trouble getting electrons to move through the wires. When I get that solved, I've got to relay a few inches of track and I'll once again have a long 30' siding in operation. A photo of the new ramp next to the old one is in my PhotoTraxx photo album. Bob Werre ------------------------------------ Yahoo! Groups Links http://docs.yahoo.com/info/terms/
