Several club members are using the Fast-Track system to make their turnouts. They're happy with the results. I'd eventually like to try them.
Ken On Thu, Aug 9, 2012 at 3:58 PM, Robert Frascella <[email protected]> wrote: > > > Rachel, > > I use Tomalco track exclusively on my layout. It's easy to use, it curves > nicely and looks fantastic when ballasted. I use code 100 for mainline > track and code 83 for yard track. Check out my blog and take a look at > Southport Yard all constructed with Tomalco flex-track. > > http://bobssscaleprrelimrabranch.blogspot.com/ > > I secure the track with silicon adhesive (recommended by Tomalco) on a > homosote base. I use push pins top hold the track in place until the > adhesive sets up. > > Turnouts are a different story. I prefer to build my own, but Tomalco has > those as well. > > Good luck and welcome to "S" > > Bob Frascella > Wenham, MA > > On Thu, Aug 9, 2012 at 3:34 PM, Bill Lane <[email protected]> wrote: > >> ** >> >> >> Rachel,**** >> >> ** ** >> >> Most Scalers use code 100 rail. If you are not interested in hand laying >> track Tomalco has the “one stop shopping” in S for flex track and turnouts. >> I don’t know the reasons for it but Larry must have had website issues. He >> changed the address from .com to .net and it is much less useful now. >> Nonetheless the contact info is http://www.tomalcotrack.net He has >> smaller code flex track and turnouts as well.**** >> >> ** ** >> >> Larry is likely at the convention now.**** >> >> ** ** >> >> Thank You, >> Bill Lane >> >>
