FRESH acc, or something like JB Weld, a 2-part epoxy. DJE
----- Original Message ----- From: John Degnan To: [email protected] Sent: Saturday, October 06, 2012 4:28 PM Subject: Re: {S-Scale List} Rusty's Magical Replacement F Unit Steps But you're still left with brass glued to plastic. The steps, themselves, as an individual entity, might be less fragile than the stock plastic steps, but you're still left with a weak connection between the brass steps and the plastic shell (nevermind the fact that brass can also be bent and broken under the SAME abnormal handling methods as plastic can) (brass is NOT bulletproof (or clumsy proof or stupid proof)). So what do you do to ensure the brass doesn't separate from the shell? Is there some special glue that does this trick well? John Degnan [email protected] [email protected] ----- Original Message ----- From: Bill Lane To: [email protected] Sent: Saturday, October 06, 2012 01:13 PM Subject: {S-Scale List} Rusty's Magical Replacement F Unit Steps One way to make sure they all match perfectly is to cut off all of the plastic steps and replace them all with Rusty's brass steps. Call it preventative maintenance since the plastic steps are pretty fragile anyway. Bill Lane
