try cyanopoxy
mel perry
On Oct 6, 2012, at 2:37 PM, David Engle wrote:
FRESH acc, or something like JB Weld, a 2-part epoxy. DJE
----- Original Message -----
From: John Degnan
To: [email protected]
Sent: Saturday, October 06, 2012 4:28 PM
Subject: Re: {S-Scale List} Rusty's Magical Replacement F Unit Steps
But you're still left with brass glued to plastic. The steps,
themselves, as an individual entity, might be less fragile than the
stock plastic steps, but you're still left with a weak connection
between the brass steps and the plastic shell (nevermind the fact
that brass can also be bent and broken under the SAME abnormal
handling methods as plastic can) (brass is NOT bulletproof (or
clumsy proof or stupid proof)). So what do you do to ensure the
brass doesn't separate from the shell? Is there some special glue
that does this trick well?
John Degnan
[email protected]
[email protected]
----- Original Message -----
From: Bill Lane
To: [email protected]
Sent: Saturday, October 06, 2012 01:13 PM
Subject: {S-Scale List} Rusty's Magical Replacement F Unit Steps
One way to make sure they all match perfectly is to cut off all of
the plastic steps and replace them all with Rusty’s brass steps.
Call it preventative maintenance since the plastic steps are pretty
fragile anyway.
Bill Lane
