Well... almost. I have found that the couplers (Kadee and Sergent both) on my SHS SW-1 are a tad bit high when installed directly (without a spacer) to the model in a Kadee gear box. And I also remember that one of the intermodal cars (was it the AM spine cars? Or the SSA well car?) was too high as well and required a good bit of work to correct.
So, almost... but not quite. John Degnan [email protected] [email protected] ----- Original Message ----- From: tpm1ca To: [email protected] Sent: Wednesday, October 24, 2012 03:21 PM Subject: {S-Scale List} Re: NMRA Standards and axle length (and the Truck Tuner) As someone who is relatively new to S but who has worked extensively in HO, I'm actually pretty impressed by how consistent S scale equipment is, in terms of axle length, coupler height, etc. I found HO products to be all over the map in this regard. Perhaps it's because there are fewer manufacturers in S, but everything - even brass - seems to have the correct coupler height...
