Thanks for the help, do yoy know if the loksound is ratted at 1.5 amps, I'am just looking for a correct sounding emd 567 piime mover thanks PaulWelsheimer...
--- In [email protected], kerhart@... wrote: > > Paul, > > I have the Loksound Select #73444 (Twin 180 HP Caterpillars) in both of my RR > GE 44-Tonners. I purchased them through Jeff Smith at Railmaster, and he > programmed them for me. I also purchased his speakers. I would need to > check which speakers are installed, but I am happy with the results. > Currently,these are the only two Loksound decoders that I have, but I intend > to purchase the 539T for my Alco S-2 and the VO-1000 this spring after Matt @ > ESU will be making new recordings. Because these two are my only Loksound > decoders at this time, the programming is a bit more laborious as they are > similar to QSI in that several CVs need to be programmed before you can > change the value of the desired CV. I am pleased with the end product (motor > control and sound reproduction). > > Keith Erhart > > >----- Original Message ----- > >From: "railroadpaul" <railroadpaul@...> > >To: [email protected] > >Sent: Wednesday, November 28, 2012 8:57:16 PM > >Subject: {S-Scale List} Loksound select decoders > > >Hi all, Is any one using the Loksound select decoders? are they any good, > >any problems/issues etc, thanks Paul >Welsheimer... > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
