You send them a picture of your engine and they send it back and you up load it
by USB port. It has the number on your picture already.
You can create buttons as well. You can down load different sounds.
When you set up your engine you let it put pressure on your fingers right and
left. It creates a file of your engine under presure.
If it is set up different you can change the direct for DC so that each engine
starts the same direction later.
I believe it handles 1.5 AM or most Can motors.
You will need to wire a 9 pin harness.
The hand unit can be updated for new software as it is up graded.
So nothing to program to your engine. You do not need to learn any DCC numbers.
You can link the engines as very fast.
Some people can write computer programs in assembler language or in Basic.
I figured I am to old to need to learn everything.
Call them and ask for Jeff. I introduced S to them and their test team.
Are we not using DCC designed for HO already.
They were glad to know we do not use large can motors like O Scale.
So you can set up a engine that has been wired in a few minutes.
It has strobe and mars lights if you want.
The touch screen puts them way ahead of all the other control systems and turn
ours require less wiring.
I know a lot of people who could never learn DCC.
I am just sharing new info to everyone and opened up a modern way to run
trains. By the way you can enter a pass word to control your engines to be only
run on your controller.
Believe me Jeff now knows about S gauge.
My tech guys took 5 controllers to a Boy and Girl scout group and they ran
trains with no instructions needed. The kids know how to use touch screens and
this opened their minds to trains. It made them run to run.
Jim Sleeth
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
