From: Alan Lambert Fort Worth, Texas Frank, One way around the return loop, is for the club to have 4 dedicated corner modules available. Then at shows where you have minimum space you can still have a loop layout. For example, My brothers "N" scale club has 4 dedicated members with corner moduales. Plus they have one extra for back up. The one problem is the four corner modules owners need to have their modules available for shows. My brother has had to do that one time even though he could not attend the show on Sat. but was there on Sunday. Just my thoughts. Alan Lambert
________________________________ From: Frank J Knight <[email protected]> To: [email protected] Sent: Wednesday, January 30, 2013 7:46 AM Subject: Re: {S-Scale List} Free Mo S Since we run our Free Mo Sn2 Crew layout with return loops, I feel qualified to respond to this statement. We used to run a continuous loop but it was always difficult to insure we had the right number and size of modules for each show. Even though we were running Free Mo we did not have much freedom in the layout configuration. That is why I decided to make the return loop modules. I made a Y module, two 60 degree curves and two 90 degree curves for each end. I also committed to buying a small trailer to carry my modules. What a difference the return loops made when running at shows. We run DCC so it was easy to use auto-reversers to control the Y turnouts. We could easily run one train continuously at a reasonable speed of about 30 scale mph. Once we installed computer control it was easy to keep up to 4 trains running on the layout. Typically 2 trains would always be running and 2 would be waiting for a clear block. One engineer could monitor the whole layout easily since it was the computer insuring that the trains would not get into trouble. Prior to installing the return loops it was so easy to start talking to someone and lose track of your train. After return loops we were free to move around and talk to the audience without concern for train collisions. Don't think that because we run Sn2 that this would not be practical for standard gauge. In Sn2 out locos are Forneys which have a long frame. My return loops are 36" radius but it wouldn't take modules much bigger to have a radius up to 48" if you wanted. One other point is that typically we have only 1 to 3 Crew members supporting our layout at shows. Frank Knight --- In [email protected], tennsgauge@... wrote: > > But the disadvantage is that it the two or more loops at the ends require > a lot more modules. A big club like Bill's CJSS could do it if they chose > to, but smaller clubs would have a harder time. > > - Earl Henry, Nashville > >
