--- In [email protected], "bcgsteam" wrote:
> The biggest advantages, of course, are they don't require striping >wires,
> require no soldering and no tape. I'm not aware of any disadvantages.
>
The big dis-advantage one has to buy them and stock them. I've never found
wrapping a feeder around the bus and soldering it to be much work, I can do it
faster than I could go find the proper connector and install it. I guess a
secondary dis-advantage could be the possibility of installing a connector
wrong leading to failure later, which is pretty hard to do with a soldered
feeder where everything is out in the open and easy to verify? ......DaveBranum
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
