I don't want to recommend this as a fix all but it is what I have done. I used Microscale Trim Film decal paper.
I used a heat gun device to warm up the dry transfer. I rubbed the dry transfer onto the trim film, CAREFULLY. I coated with Microscale decal restorer. I then applied the decal I used the Microscale setting solution I used the Microscale decal solvent solution I used a top coat, dull or satin I never tell anyone which models I've done that too. I want to apologize for referring to what I actually do instead of just an opinion piece. Rusty --- In [email protected], "hanslik71@..." <hanslik71@...> wrote: > > I was wondering if anyone has made purchases from TRM Distributing in > Ontario. Have you been happy with the service have you received from TRM? I > have several cars awaiting paint and lettering but after my poor experience > with Jerry Glow Decals (and hearing the same from some others), I am more > than a bit apprehensive dealing with someone new (to me). Your opinions are > much appreciated! > > Thanks, > > Bill Hanslik Jr. > Uhrichsville Ohio > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
