As is sometimes typical, I took one step backwards before making any progress
on installing KD802s on my new SD70ACe. That was I ground the philips head out
of the top of the one of the bracket mounting screws. It got more involved
after that when I realized the instructions do not tell you how to fix the
pilot to the frame. Accomplishing that revealed that the frame was not mounted
square to the shell because there is a little extra glob where the wiring for
the left ditch light enters into the innards. So now I need to take the entire
shell off to remove the glob.
So now I'm about 5 steps backwards and the problem remains that I have a lame
loose screw and need to find a replacement. Is there a good source for these
tiny machine thread screws?
Ben Trousdale
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
